Mini 80 Watt 2 Channel Line Output Converter

A 2 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier RemoteGenerator. The LOC is designed to convert (2) channels of speaker level audio into(2) channels of line level audio that can be used by OEM amplifiers. It can also be usedwith OEM radios to add aftermarket amplifiers. This device will also detect the presenceof an audio signal and then generate a +12V output that can be used to turn-on anaftermarket amplifier. The LOC is able to handle 80 watts per channel continuous input without over heating.The input circuitry is designed to correct the crossover distortion commonly found onstandard LOCs while providing a high to low level step down of 6:1. Output audio level isinfinitely adjustable using the onboard, high quality potentiometers. The remote outputor amplifier trigger is rated at 500mA (+12V) and will easily handle an outboard relayif additional current is needed. The remote output will trigger instantaneously when theLOC detects a DC voltage on the white, left + audio input wire above 5V or a very lowaudio signal. It will shut off 60 seconds after no signal is detected. The LOC should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM speakers.