Schneider Electric IECMagContactor, NonReversing, 240VAC LC1D80U7

The Schneider Electric IEC Magnetic Contactor is a 3-pole, non-reversing electrical switch operated by a 240 V AC coil. It features 1 normally open and 1 normally closed auxiliary contact (2 total) and uses screw clamp terminals. The device is rated for operation with IEC-standard motor and resistive loads; it has an IP20 enclosure rating and the TeSys series designation; it can be mounted on DIN rail or plate. Main circuit ratings are specified as up to 690 V AC and 300 V DC; rated for operation at frequencies of 50/60 Hz. Key features - Contactor type and action: IEC Magnetic Contactor, 3 poles, Non-Reversing; Auxiliary contacts: 1NO/1NC (2 total) - Coil and frequency: 240 V AC coil; 50/60 Hz operation - Enclosure and mounting: IP20 enclosure rating; Mounts on DIN rail or plate; Terminals: Screw Clamp - Main contacts and ratings: 3 normally open main contacts; Full Load Amps – Inductive: 80 A; Full Load Amps – Resistive: 125 A - Voltage ratings: Rated voltage: 690 V AC, 300 V DC - Durability and cycles: Electrical durability is specified as up to approximately 1,500,000 or 800,000 cycles under test conditions; Mechanical durability is approximately 4 million cycles - Time-related specs: Operating time – Closing: 20–35 ms; Opening: 6–20 ms; Non-overlap time: 1.5 ms - Inrush and hold: Inrush VA: 245 VA; Hold VA: 26 VA - Standards and series: Frame/Series: TeSys; Series: TeSys Deca; Standards include EN 60947-4-1, EN 60947-5-1; UL 508 listed; IEC standards including IEC 60947-4-1 and IEC 60947-5-1 - Protective features and limits: Equipped with a protective cover (note: does not imply safety certification); Rated for ambient temperatures up to approximately 60°C; specific operational limits should be verified in detailed specifications. Shock and vibration ratings (e.g., 10 G closed, 8 G open; 3 G closed, 2 G open) - Physical dimensions and weight: Overall depth 5.12 in, height 5 in, width 3.34 in; Net weight 1.59 kg