The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network. An adjustable audio delay buffer is included on the Dante output for audio and video lip sync. The unHX2D features flexible audio routing between system input sources and outputs, and facilitates bridging audio from either video sources or monitors to a Dante/AES67 network. The HDMI output operates as a pass thru repeater of HDMI input video source. The unHX2D also includes installer adjustable EDID management settings via software.
Features - HDMI 2.0 compliant (HDCP 2.2) pass-through support for up to 4K/60/4:4:4 video, 2 channel PCM audio
- Highly configurable routing between system inputs and outputs allow PCM HDMI audio from both HDMI sources and monitors to be bridged over the Dante network
- 170ms of adjustable lip sync delay on the Dante TX 1-2 audio output path
- Installer adjustable EDID management settings via software
- Powered by either IEEE 802.3af PoE or a +24VDC from an external supply
- Supports Dante and AES67
Specifications - Dynamic Range: > 105 dBS/PDIF Audio Inputs
- Supported Formats: S/PDIF ( IEC-60598) 2 CH PCM, 24bit
- Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 192 kHz
- THD+N: S/PDIF Audio Output (Mirrors HDMI Input Audio)
- Supported Formats: S/PDIF ( IEC-60598) 2 CH PCM, 24bit
- Max Color Depth: 48 bit
- Connectors: HDMI Type ADante Network
- Physical Layer: Ethernet
- Connector: Single RJ-45
- Cable Quality: CAT-5e or better
- Transmission Speed: 100 Mbps
- Supported Sample Rates: 48kHz
- Minimum Dante Network Latency: 1ms
- Cable Quality: CAT-5e or better
- Width: 9.19"
- Height: 1.06"
- Depth: 4.0"
- Weight: 1.5 lbs
- SKU: TCNCD378651