Modway Transmit 70" Media Console Wood TV Stand in Walnut White

OK, first off let me say that I have built a lot of furniture like this over the years. That said this is one is made out of QUALITY/SOLID material. Way better than IKEA. THE MDF is HARD and strong. Had extra supports and it went together like a dream. That is what I am most happy about. Now what I really think they need to improve on with this kit. On the bottom of the draws where the rail rollers are attached is secured by three 1/4 inch screws per rail. Horrible engineering considering this is MDF. The screw is so short that ther eis really nothing for it to bite into hence there is NEVER resistance when the screw bottoms out. The screws need to be LONGER/DEEPER. If something fails on this item it will be those rails coming lose, and unable to be re-tightened. If this happens to YOU, Drill a very fine pilot hole about an inch deeper into the drawer wall(s) in the same hole the original screw went into. Obviously you will need to buy several new screws (12) but it will fix your issue. DO NOT put FATTER screws into this wall it will split the MDF. Take the screw you took out/fell out of the wall and bring it to Home Depot and get the same size (width) but an inch longer. Otherwise this a a really GREAT purchase, and I would certainly buy it again.