Gorilla All Purpose Epoxy Stick Putty 2 Ounce Waterproof Permanent Bond 10 Minutes Set Incredibly Strong 424502, 12-Pack

Gorilla All Purpose Epoxy Stick is an incredibly strong and versatile epoxy putty. The hand-mixable, easy to use Epoxy Stick sets in just 10 minutes and works on most surfaces. Gorilla All Purpose Epoxy Stick is waterproof, non-rusting and once cured, it can be drilled, sanded, and painted. It’s great for auto, plumbing, household repairs and more!

Incredibly strong - 1550 PSI and dries a gray color. Forms a permanent bond on metal, plastic, concrete, ceramic, PVC, fiberglass, stone, glass, wood and more! Withstands temperatures up to 300 degrees F. Application temperature - 40 -104 degrees fahrenheit and Service temperature - -20-300 degrees fahrenheit. The cure mechanism is a 2 part reaction that requires mixing. Can be used in/outdoors and as a gap filling. NSF/ANSI 61 certified drinking water safe.
 
Note: Bonded wood materials should not be submerged or soaked in water. Not for exhaust systems. For temporary repair of drainage pipes or low pressure pipes only. Not recommended for use on polyethylene or polypropylene plastics.

Directions:

Wear disposable gloves to avoid skin contact. Remove foil sticker & film wrapper and set aside for storage of any unused putty. Wash hands thoroughly after handling.

1. For best results, roughen smooth surfaces with sandpaper before applying putty. All surfaces should be clean and free of grease, oil, or other loose particles.
2. Cut off desired amount of putty.
3. Mix by kneading the putty to a uniform color (approx. 30-60 seconds). Putty will not harden completely if not mixed thoroughly.
4. Apply putty by firmly pressing to the project surface within 5 minutes of mixing.

SET TIME: 10 minutes
CURE TIME: 24 hours
CLEAN UP: Remove any excess material before hardening.
USAGE: Use in a well-ventilated area. Paintable after 1 hour. Wear dust mask and protective eyewear when sanding or drilling cured product.