Feature:
1. It is made of PVC rubber, which is self-adhesive and has no residue after tearing off.
2. Its waterproof backing is resistant to wear, moisture and weathering, and has a long service life.
3. It can be easily cut into any size suitable for any shoes, not only can prevent the shoes from falling off, the special design will play an important role in anti-slip.
4. The operation is simple. As long as the sole sticker is attached to the place where the sole touches the ground, the sole can be protected and will not damage your heel and shoes.
5. Its transparency and self-adhesiveness make it on the soles of our shoes. It is most suitable for any shoes with heels, such as high heels, stilettos, boots, etc.
Specification:
Item Type: Shoes Sole Stickers
Material: PVC Rubber
Product Color: As Pictures Shown
Width: Approx 10 cm/3.9 in
Product Weight: Approx. 72-223g/2.5-7.9oz
Instructions:
1. Prepare the necessary tools: Sole stickers, small scissors.
2. Cut the appropriate length, only need to paste the front part of the high-heeled shoes that is in contact with the ground. Generally, the high-heeled shoes can be pasted 3 pairs per meter, and the flat-bottomed shoes can be pasted 2 pairs (the heel cannot be pasted).
3. Tear off the white release paper on the back and start pasting. When pasting, tear off the side stickers from top to bottom to squeeze out the air as much as possible.
4. Cut off the edges and hold it with the sole facing upwards when trimming, so it is easier to cut.
5. After sticking, press hard and repeatedly to make it firm. Wear shoes 24 hours after application.
The replacement method of the sole sticker: First use a hair dryer to heat the insole to soften the glue, and then slowly tear it off (remember not to tear it off directly to avoid hurting the coating of the sole).
Package List:
1 x Shoes Sole Sticker
