E3D High Temperature Heated Bed - 300x200mm, 110V

Key Features:

• Heats to 100degC in 80 seconds 0.8mm flatness
• Pre-wired 104-GT2 "E3D" thermistor and power cables
• Vulcanized silicone heater pad
• 3mm thick aluminum plate

These E3D high-temperature heated beds are capable of reaching 100degC in just 80 seconds. Not only do these beds heat quickly, but they also reach temperatures other beds can only dream of, with operating temperatures of 200degC. They use a standard E3D 104NT thermistor for temperature sensing.

E3D has taken a safety-first approach with their high-temperature heated beds, with the silicone heaters being vulcanized directly to the anodized under-surface of the aluminum plate. This eradicates the need for performance limiting adhesives, used by many other beds on the market. 

Item Specifics
1 - High temperature heated bed
4 - PPS bed spacers
4 - M3 x 8mm dome head screws
8 - 3mm ID washers
Peak temperature: 250degC
Max temperatures: 200degC

Warnings: These beds reach temperatures high enough to burn skin, please use the appropriate protective equipment while operating a machine using this bed. 

Please be advised that these are mains powered beds. Users are responsible for ensuring that their setup meets local regulations and that the bed is sufficiently earthed/ connected to ground using the threaded hole provided.