Speedway makes plumbing brake lines easy with this steel brake line kit that includes new lines and fittings to make your job less stressful. Kit Includes: (1) 25 Ft. Roll of Speedway 3/16 Inch PVF Coated Steel Brake Line. (6) Speedway Stainless Steel -3 AN Hard Line Tube Sleeves. (6) Speedway Stainless Steel -3 AN Fitting Tube Nuts. Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings. Speedway 3/16 Inch PVF Coated Steel Brake Line Now available for your 3/16" brake line consideration is a new PVF Poly-Armour Poly-Vinyl Fluorine coated brake line. PVF coating is a highly durable 'plastic' coating that is 'baked and cured' to the line for a durable finish that provides a clean look and appearance with a dark olive green color. This provides extra protection from corrosion, debris, and road surfacing solutions. Also offers superior bend-ability without kinking and bends easier than standard brake line tubing. This makes Poly-Armour the easiest line to work with-period! Underneath the PVF coating is a double-wall, low carbon steel, copper brazed tubing which meets all international and U.S. requirements for brake tubing. Considered a premium line, Poly-Armour hard line should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel etc. PVF Poly-Armour coated line is the perfect choice for the racer for those weekend after race chassis washes week after week or any street rod fabricator wanting to utilize a hard line application for that beautiful finish that will last for years. Available in a 25' roll of 3/16" line. This line bends easily and smoothly with hand tools and can be flared with a 37° AN flaring tool, or 45° double flaring tool. Use in conjunction with our 3/8"-24 inverted flare male brake line nuts, or AN tube nuts and sleeves. Speedway Stainless Steel -3 AN Hard Line Tube Sleeves These stainless steel hard line tubing sleeves are commonly used in brake line systems. They slip over 3/16" brake line tube and allow you to make a 37-degree flare -3 AN connection when used with included nuts. Speedway Stainless Steel -3 AN Fitting Tube Nuts These stainless steel hard line tubing nuts are commonly used in brake line systems. They allow you to make a 37-degree flare -3 AN connection when used with included sleeves. Works with 3/16" diameter brake line. Also available are stainless -3AN Bulkhead, -3 AN Couplers, and Pipe to -3AN Fittings to help complete your brake line installation.
