Extreme Duty 6ALN Circle Track Ignition Control
Per Spark Energy: 105-115 mJ Built-in Rev Limiter with RPM Modules CARB Approval: Non-Emissions Controlled Red NASCAR-Approved Connectors Targeted for NASCAR and Off-Road Racing The MSD 6ALN was designed with NASCAR and Off-road racers in mind... in fact, this capacitive discharge high-power ignition is approved by NASCAR! It features the mandatory 6-pin weathertight connector that meets NASCAR ignition wiring rule 20-6.1. The connector provides a tight, positive lock-ing connection with individual seals to keep dirt and moisture away from each connection. All of the MSD's primary wiring meets MIL-86A specifications with special tinned conductors for superior crimps. Inside the strong cast aluminum housing, the multiple sparking CD circuits are encased in a clear two-part silicone elastomer for the ultimate in vibration protec-tion. A special clear baseplate is also installed for easy tech inspection. Highlights Designed for Circle Track racing with NASCAR-mandated 6-pin weathertight connector Clear epoxy potting compound for extreme vibration protection Circuit board is encased in a clear two-part silicone elastomer Clear plastic base for easy tech inspection Soft Touch Rev Control is adjustable with RPM modules Accepts breaker points, amplifier, and magnetic pickup trigger inputs No CARB Exemption Order Number Operating Specifications Spark Energy: 105-115 mJ per spark up to 15,000 RPM Primary Voltage: 460-480 volts Secondary Voltage: 45,000 volts (tested with Blaster Coil) Spark Series Duration: 20° crankshaft rotation RPM Range: 15,000 RPM with 14.4 volts Voltage Required: 12-18 volt electrical systems Current Draw: 1 amp per 1000 RPM Size: 8" L x 4" W x 2.25" H Weight: 5.1 lbs
Multiple spark, capacitive discharge ignition control Supplied with 3,000, 6,000, 7,000 & 8,000 RPM Modules Supplied with rubber shock mounts Programmable for 4, 6, or 8-cylinders by cutting red/blue wire loops 110 millijoules per spark up to 15,000 RPM 470 primary voltage output to coil Accepts breaker points, amplifier and magnetic pickup trigger inputs Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
WARNING: 