Tenergy Smart Charger for 11.1V Li-ion/LIPO Battery Pack

Product description

Constant charging current for faster charging, save you much more time.
Stabilized output; low ripple.
It can charge any 11.1V Li-Ion/LiPO battery pack with capacity > 2000mAh. Onlyuse this charger for battery packs with built-in protection circuit. Never useit for hobby packs (RC, airsoft etc) which are unprotected and are designed tobe balance-charged
Safety protection:Over Voltage protection, Short Circuit protection, Polarityerror protection, and Over power protection. Can NOT be used to charge batterypacks without Protection Circuit Board (PCB).
The charger turn trickle-off charging mode if battery is full (1/10C)

Features:
100V-240V AC input for worldwide power support.
Constant charging current for faster charging, save you much more time.
Stabilized output; low ripple.
It can charge any 11.1V Li-Ion/LiPO battery pack with capacity > 2000mAh.

Safety protection:
- Over Voltage protection
- Short Circuit protection
- Polarity error protection
- Over power protection

The charger turn trickle-off charging mode if battery is full (1/10C), andindicate by LED:
Charging ----- Red LED
Battery Full -- Green LED

Specification:
Input: AC 100-240V 50-60Hz 1.0A
Output: DC 12.5~12.75V
Charging current: 2,000mA
Weight: 15 oz

Note:
This charger is designed to charge only 3.7-14.8V 1-4 cells Li-ion/LiPorechargeable battery pack.
Only use this charger for battery packs with built-in protection circuit.
Never use it for hobby packs (RC, airsoft, etc) which are unprotected and aredesigned to be balance-charged.
Please DO NOT use this charger with any pack that doesn't have a built-inprotection circuit board/module (PCB/PCM).

Warning:
Charge 11.1V Li-Ion/LIPO rechargeable battery pack only.
Don't expose the product to rain or humidity to prevent from electric shock.
It is normal if the product gets slightly hot when using.
Keep the product out of children's reach.
Don't remove the cover to prevent from being electric shocked.