We are proud to introduce a new type of coating to the market! Greenway's new resin coating is one of most unique and easiest to apply coatings on the market. Unlike typical ceramic based coatings, our resin-based coating provides something new and fresh to the market.
Greenway;s Trench Coat replaces your standard ceramic coating, wax, sealant or any other type of topcoat of your choice, with a durable coating that can be layered and wipes on as easy as a detail spray.
The modified resin within Trench Coat helps sheet water off the surface to the point that the surface is almost self-drying and self-cleaning. The contact angle of the water droplet is so great that much of the surface can actually become superhydrophobic.This greatly reduces the chance of any remaining water sitting on the surface as well as debris.
The resin within Trench Coat actually helps fill the smallest areas on the clearcoat, plastic or glass which help create the ultimate superhydrophobic surface. As you wash your vehicle you will notice that the water simply sheets off the vehicle leaving you with much less drying work.
After a rain storm you will observe that the surfaces will continue to sheet water which helps prevent further dirt and debris from attaching itself to the surface. This will also help with water spotting that can be created by acid rain.
Paint Preparation:
The most important application method is to make sure that the surface is properly cleaned. You will need to remove any wax, sealant, ceramic or any other protective coating that is on the surface. This can be completed by using our Cleanse Shampoo during the wash stage, or a rubbing alcohol/water mixture can be completed after the washing and drying stage.If the vehicle has any type of overspray or other particles on the clearcoat, please remove these items by using a clay bar or fallout remover&
Application:
Trench Coat can be applied to wet or dry surface. When you apply it to a dry surface, the durability becomes greatly increased, but a wet coat and a dry coat can be easily accomplished in the following manner. After rinsing all the remaining car shampoo off your vehicle, simply spray Trench Coat onto the surface. You can take a soft microfiber towel and dry the surface that contains the Trench Coat. It is that simple.
After completing the drying stage, a second application can be applied to the dry surface. Simply spray Trench Coat onto the surface and wipe off. You will notice that the product quickly evaporates allowing ease of use and only a small amount is needed to complete the entire vehicle. Typically, 2 ounces to 6 ounces of product is all that is needed in order to coat an entire vehicle.
We recommend using a quality microfiber towel to apply and remove the coating.As you apply the resin coating, you will observe that most of the product will actually flash off the surface which will allow for less wiping, quicker application and reduce the chance of marring.
Maintenance:
You can use any standard pH balanced shampoo when washing your vehicle, but we do not recommend using shampoos with wax in them. While the wax will not harm the coating, the wax will alter the appearance the coating creates as well as the characteristics of the water and dirt behavior. You will notice when the vehicle is has a large amount of dirt on the surface, the water sheeting ability is not as apparent, but PROTECTION IS NOT COMPROMISED. Simply wash and dry the vehicle which will allow for characteristics of Trench Coat to return.
