Hallowell H5711-1810PB Hallowell H-Post High Capacity Shelving 48 inch W x 18 inch D x 123 inch H 707 Marine Blue Posts and

Each Hi-Tech High Capacity heavy-duty shelf has a tubular welded box beam in front and rear for maximum strengh, exclusive triple bend side flanges for even more strengh, lapped and welded corners, and the tops of shelves are punched to accept shelf dividers Each shelf is installed using only 4 shelf clips and can be installed together with both beaded front and angle back posts as well as T-posts and H-postsFeatures- Type - adder- Shelf capacity - 450- Dimension - 48 W x 18 D x 123 H inH-Posts- Fabricated from 14 gauge cold rolled steel and roll formed into an 1-12 wide x 2-1516 deep tubular section Rear flanges are welded on 6centers to provide maximum strength Sides of the post are punched 1-12 on center with 38 x 78 rectangular slots to receive shelf clip Rear flanges of the post have holes punched on 3 centers for the attachment of side sway braces or field attached solid side panels Post front is slotted on 3 centers for beam connection and combination clip attachment and is punched on 3 centers for field attached back connector strips Provide 2 H-Posts between each adjoining section and at row endsSide Sway Braces- 1 in x 11 gauge cold rolled steel strip with safety edges to eliminate sharpness The center of two identical pieces shall be punched to be bolted together forming an X Ends shall be radiused and punched for attaching to front and back posts Provide between adjoining sections and at row ends for open-type shelving applicationsBack Sway Braces - 1 in x 11 gauge cold rolled steel strip with safety edges to eliminate sharpness The center of two identical pieces shall be punched to be bolted together forming an X Ends shall be radiused and punched for attaching to two back posts Provide at back of all open-type shelving applicationsFoot Plates- 2-14 x 3-12 in x 11 gauge steel plate with mounting bracket welded on top The bracket is punched for fastening to H- posts The plate shall have a 716 diameter hole punched on one end for floor anchoring and be embossed on the other end for Shim Plate alignment Provide as required for floor anchoring or when shimming is required for a level installationShelves Heavy Duty- Formed with two ribs along the horizontal front and rear edge and are stamped on the top left corner for identification Class 1 shelves are fabricated from heavy gauge cold rolled steel and have roll formed rectangular tubular shaped front and rear edges with return bends resistance welded to the under side of shelf Welds are spaced 3 inon center to provide maximum strength Sides are triple flanged to form a channel All four corners are lapped and resistance welded to provide a rigid corner and add extra strength to the shelf Top surface shall be punched for attaching Shelf Dividers from left to right on 1-12 in centers, front and back, for 36 wide x 12, 15, 18 and 24 in deep shelves All other sizes are punched on 3 in centersFront and rear surfaces are punched for attaching accessories Tubular front edge is designed to protect against impact loads Used for uniformly distributed loads up to 800 poundsShelves Extra Heavy Duty- Formed with two ribs along the horizontal front and rear edge and are stamped on the top left corner for identification Class 2 shelves are fabricated from extra heavy gauge cold rolled steel and have roll formed rectangular tubular shaped front and rear edges with return bends resistance welded to the under side of shelf Welds are spaced 3 in on center to provide maximum strength Sides are triple flanged to form a channel All four corners are lapped and resistance welded to provide a rigid co SKU: HLWL6094