H-Posts Fabricated from 14 gauge cold rolled steel and roll formed into an 1-1/2 in. wide x 2-15/16 in. deep tubular section. Rear flanges are welded on 6 in. centers to provide maximum strength. Sides of the post are punched 1-1/2 in. on center with 3/8 x 7/8 in. rectangular slots to receive shelf clip. Rear flanges of the post have holes punched on 3 in. centers for the attachment of side sway braces or field attached solid side panels. Post front is slotted on 3 in. centers for beam connection and combination clip attachment and is punched on 3 in. centers for field attached back connector strips. Provide (2) H-Posts between each adjoining section and at row ends.
- Finish - Marine Blue for Posts and Side Sway Braces
- Dimension - 48 W x 24 D x 123 H in.
Side Sway Braces 1 in. x 11 gauge cold rolled steel strip with safety edges to eliminate sharpness. The center of two identical pieces shall be punched to be bolted together forming an "X". Ends shall be radiused and punched for attaching to front and back posts. Provide between adjoining sections and at row ends for open-type shelving applications.
Back Sway Braces 1 in. x 11 gauge cold rolled steel strip with safety edges to eliminate sharpness. The center of two identical pieces shall be punched to be bolted together forming an "X". Ends shall be radiused and punched for attaching to two back posts. Provide at back of all open-type shelving applications.
Foot Plates 2-1/4 x 3-1/2 in. x 11 gauge steel plate with mounting bracket welded on top. The bracket is punched for fastening to H- posts. The plate shall have a 7/16 in. diameter hole punched on one end for floor anchoring and be embossed on the other end for Shim Plate alignment. Provi- SKU: HLWL6093
WARNING: 