Product Description
Touchless activated kitchen sink faucet operation:
INFRARED MOTION USE INSTRUCTION:
- Please put your hand to get close to the red light. When the water is coming, you can take back your hand.
- As you know, the infrared sensor will be response within 0.5 second. Hence you don't need to always keep your hand staying in the front of the red light.
- The smart kitchen faucet has been designed with the autostop function behind three minutes. So please don't worry about that it will waste too much water.
There are some tips to deal with the problem of the unnormal touchless feature.
- Please check out the distance whether it's too far away. (Note: the sensing distance is 3 inches.
- Please check out the battery power whether it is enough. (When the red light pulsates on and off, you need to change the battery)
- If you've ensure other connection staying right setting, please reset the sensor by taking off the power wire and signal line around a minute.
High-quality sprayer, water flow, difficult to pluy, easy to clean.
The spray holes allow mineral residue to simply be wiped away for an instantly refreshed look .
Multi-Flow-Two function spray wand allows you to easily and ergonomically switch from spray to stream to a high water flowlasting powerful flow.
More detailed about the kitchen faucet.
Pull-Down Commercial Design with Flexible Hose: 30 inches hose Pull-down spray wand can reach each corner of your sink.
Note:
Someone maybe thinks that the stainless steel hose will be better than the braided nylon hose.
It is erroneous to think that the stainless steel hose will be more durable.
The braided nylon hose has more advantages in many aspects than stainless steel hose, just like better anti-corrosion, resistance to wear, and longer durable year.
More considerate design: 80~140°F, No burns.
The kitchen faucet has smooth stainless steel interior. It is easy to prevent the leaking caused by rusty from the interior.
Three tips to check the touchless faucet when you instal it.
1. Check: Please check out all of the installation parts you need, including the Metal Deck Plate and all gaskets.
2. Check: Please make sure all of the gaskets in the right place so that prevent leaking happening.
3. Check: Please make sure all of the hoses to be separated in case intertwined and disturbing the sensor.
Note:
Tightening the supply hoses and separate them to the pull-down hose in case that the sensor doesn't work.
