Superior Tool 5255 Tub Drain Extractor Tool, 1/2 in Jaw Opening

Had a tub drain that wouldn't hold the stopper any longer because the center threaded portion had corroded away from the caustic water in Buckeye, Arizona. The drain plugs are sealed in to the tub bottom pretty well to prevent bath and shower water from leaking under the tub and causing who knows what damage. I just followed the instructions on the package and tapped the Extract tool into the tub drain. The Extractor has a decent amount of taper so should fit most all 1-1/2" metal drain holes. I used a 1/2" drive extension and ratchet to remove the drain, but you could also use a crescent wrench or a combination wrench on the Extract tools hex. The drain unscrewed pretty easily and was removed without much effort. On the new drain plug, I put about three to four wraps of Teflon tape on the the entire thread length. I then used GE Premium Waterproof Silicone II Sealant, which I use exclusively in kitchens and bathrooms. The 2.8 OZ, tube is plenty. Let dry for 24 hours, and the job is finished. The Drain Extract Tool is one handy device and saved tons of time over drilling and banging out the old metal tub drain. Tom W.