Angling Cylinder Ram 56102 10" x 1-1/2" Snow Plow

I should have listened to the previous review I read. It is junk. The holes do not fit the pins from your original cylinder. I bought 3/4 inch plow pins and they go in one side but would not go all the way through. I used a hammer to try and force them through. I got it but still to tight. I had to put bolts, spacers, and large washers to fabricate to make work. The hose line screws in from the side rather than the top. For something that should have took me a half an hour to replace took me hours and trips to the hardware store. TRUST THE REVIEWS! Pay $30.00 more and get something that fits right. You will save yourself a huge headache! I got it on. I will find out if the cylinder even works tomorrow.