MEC ME1665-15 Pigtail POL x 1/4 in. Inverted Flare x 15 in. L, 7/8 in. HEX

These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.1/4 in. male inverted flare x male hard nose POL, 7/8 in. nut1/4 in. tube O.D.Short nippleUL Listed and tested in accordance with UL 569
These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm - https://www.p65warnings.ca.gov/chemicals/lead-and-lead-compounds