Hero image 0 of Rockville RPA14 7000 Watt Peak / 2000w RMS 2 Channel Power Amplifier Pro/DJ Amp, 0 of 9

Rockville RPA14 7000 Watt Peak / 2000w RMS 2 Channel Power Amplifier Pro/DJ Amp

Name: Rockville RPA14 7000 Watt Peak / 2000w RMS 2 Channel Power Amplifier Pro/DJ Amp
Brand: Rockville
SKU: 375602406
Price: 324.95 USD
Availability: InStock

(No ratings yet)

Key item features

Rockville RPA14 Professional/DJ 2000 Watt Continuous Power 2 Channel Audio Power Amplifier

RMS power output: Stereo 8 Ohm: 2 x 700W, Stereo 4 Ohm: 2 x 1000W, Bridged 8 Ohm: 1 x 2000W
Peak power output: Stereo 4 Ohm: 2 x 3500W Max, Bridged 8 Ohm: 1 x 7000W Max
Input terminals: Combo jack (XLR and ¼”) A & B inputs
Output terminals: Banana binding post speaker output, Speakon output, XLR output to connect another amplifier or powered sub
LCD displays volume in dB per channel and operating temperature
2U rack space design
Built-in limiter protects speakers from distortion and clipping
Bridged mode allows combining both channels power into one channel for subwoofer use
Stereo mode supports (2) speakers or (4) speakers in left and right configuration
Parallel mode provides dual mono output signal for monitor use
Built-in crossover switch (bypass, 80 Hz, 160 Hz) for use with full range PA speakers or subwoofers
Channel A & B clipping LED indicators
Separate level controls for Channel A & B
Power, signal, clipping, and protection LED indicators on the front
Heavy-duty rack mount ears with handles
Built-in variable high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-ohm speakers
Level controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal overload, and DC overload
User serviceable fuse (20A, 250V)
Frequency response: 10 Hz – 30 kHz
Total harmonic distortion + noise @ 1 kHz full power: <0.03%
Input impedance: 10K Ohm balanced
Input signal voltage: 660mV – 1.5V
Input sensitivity: 0.7V
Damping factor: (100Hz, 10W, 4 Ohms): 43.4, (1 kHz @ 8 Ohms): >400:1
Effective damping factor (100Hz, 10W, 4 Ohms): 1.08
Output impedance at speaker terminals: 0.09214 Ohms
Frequency response vs THD+N (worst case, across normal bandwidth 1W): 0.6%
Signal to noise ratio: >100dB
IMD 60Hz & 1kHz, 4:1: <0.04%
Slew rate (input filter limited): 40V/µS
Power requirements: 120V / 50-60Hz
Weight: 28.7 lbs
Dimensions: 19.09 x 16.93 x 3.35 inches

Specs

Rms power rating
2000 W
Speaker config.
2.0
Peak audio power handling
7000 W
Brand
Rockville
Rec. use
DJ
Impedance
8 ohm

Current price is $324.95

Price when purchased online

Free shipping
Free 30-day returns

Walmart Accident Plan by Allstate

(Only one option can be selected at a time)

3-Year Plan - $36.00

4-Year Plan - $49.00

How do you want your item?

Columbus, 43215

Arrives between Apr 15 - Apr 18

Sold and shipped by Audiosavings

4.2907253269916765 stars out of 5, based on 1682 seller reviews(4.3)

Report an issue with this seller

Free 30-day returns

About this item

Product details

Video of RPA14:

Power Ratings:

RMS Power Output:
Stereo 8 Ohm: 2 x 700W
Stereo 4 Ohm: 2 x 1000W
Bridged 8 Ohm: 1 x 2000W
Peak Power Output:
Stereo 4 Ohm: 2 x 3500W Max
Bridged 8 Ohm: 1 x 7000W Max

Terminals:

Input Terminals:
Combo jack (XLR and ¼”) A & B inputs
Output Terminals:
Banana binding post speaker output
Speakon output
XLR output to connect another amplifier or powered sub

Features:

Rockville RPA14 7000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
LCD displays volume in dB per channel and operating temperature
2U rack space
Built in limiter protects your speakers from distortion and clipping
Bridged mode allows you to combine both channels power into one channel for use with a subwoofer
Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration
Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s)
Channel A & B Clipping Led Indicators
Channel A & B Separate Level Controls
Power, signal, clipping, and protection LED indicators on front of amp
Heavy duty rack mount ears with handles
Built-in variable high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-ohm Speakers
Level controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
User serviceable fuse (20A, 250V)
Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz
THD + Noise @ 1Khz full power: <0.03%
Input Impedance: 10K Ohm Balanced
Input signal voltage: 660mV – 1.5V
Input sensitivity: 0.7v
Damping factor: ( 100Hz, 10w, 4 ohms): 43.4
Damping factor: (1Khz @ 8 ohm): >400:1
Effective damping factor (100Hz, 10w, 4 Ohms) 1.08
Output impedance at speaker terminals: 0.09214 Ohms
Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.6%
Signal to Noise Ratio: > 100dB
IMD 60Hz & 1kHz, 4:1: <0.04%
SLEW RATE (input filter limited) : 40v/uS
Power Requirements: 120V / 50-60Hz
Weight: 28.7 lbs
Dimensions: 19.09 x 16.93 x 3.35 inch

Rockville RPA14 Professional/DJ 2000 Watt Continuous Power 2 Channel Audio Power Amplifier

RMS power output: Stereo 8 Ohm: 2 x 700W, Stereo 4 Ohm: 2 x 1000W, Bridged 8 Ohm: 1 x 2000W
Peak power output: Stereo 4 Ohm: 2 x 3500W Max, Bridged 8 Ohm: 1 x 7000W Max
Input terminals: Combo jack (XLR and ¼”) A & B inputs
Output terminals: Banana binding post speaker output, Speakon output, XLR output to connect another amplifier or powered sub
LCD displays volume in dB per channel and operating temperature
2U rack space design
Built-in limiter protects speakers from distortion and clipping
Bridged mode allows combining both channels power into one channel for subwoofer use
Stereo mode supports (2) speakers or (4) speakers in left and right configuration
Parallel mode provides dual mono output signal for monitor use
Built-in crossover switch (bypass, 80 Hz, 160 Hz) for use with full range PA speakers or subwoofers
Channel A & B clipping LED indicators
Separate level controls for Channel A & B
Power, signal, clipping, and protection LED indicators on the front
Heavy-duty rack mount ears with handles
Built-in variable high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-ohm speakers
Level controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal overload, and DC overload
User serviceable fuse (20A, 250V)
Frequency response: 10 Hz – 30 kHz
Total harmonic distortion + noise @ 1 kHz full power: <0.03%
Input impedance: 10K Ohm balanced
Input signal voltage: 660mV – 1.5V
Input sensitivity: 0.7V
Damping factor: (100Hz, 10W, 4 Ohms): 43.4, (1 kHz @ 8 Ohms): >400:1
Effective damping factor (100Hz, 10W, 4 Ohms): 1.08
Output impedance at speaker terminals: 0.09214 Ohms
Frequency response vs THD+N (worst case, across normal bandwidth 1W): 0.6%
Signal to noise ratio: >100dB
IMD 60Hz & 1kHz, 4:1: <0.04%
Slew rate (input filter limited): 40V/µS
Power requirements: 120V / 50-60Hz
Weight: 28.7 lbs
Dimensions: 19.09 x 16.93 x 3.35 inches

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Rms power rating

2000 W

Speaker config.

2.0

Peak audio power handling

7000 W

Brand

Rockville

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.