Titebond DuraMaster Acrylic Latex Sealant 32111 - Indoor/Outdoor Use - 10.1 oz, Brown

Titebond DuraMaster Sealant is the FIRST elastomeric, water-based sealant with 100% joint movement. APPLICATION TEMPERATURE: Above 40F and below 120F. SERVICE TEMPERATURE RANGE: -25F to 180F white and colors. METHOD OF APPLICATION: Cartridge/caulking gun. WORKING TIME: Approximately 10-15 minutes for a 1/4" bead. WORKING SURFACES: Surfaces must be cleaned down to the original substrate, dry and free from oil, grease, water, dirt or any other material that may prevent adhesion. JOINT/GAP SPECIFICATIONS: 2" maximum width and 1/4" maximum depth. DRY TIME: 2-4 hours. CLEANUP: Clean excess material with a damp cloth. Clean hands and tools with soap and water. Scrape dried excess. LIMITATIONS: Do not apply on exterior surfaces if rain is expected within 24 hours. Air, sealant, and surface temperatures should be 40F 4C and rising. Protect from rain for 24-48 hours after application. Dry time may be extended in humid or cold conditions. Painting may occur within 2-4 hours after application with a high-quality, water-based latex-based paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is dry to the touch and does not transfer, remove masking tape. If joint depth exceeds 1/2, use backing material. NOTE: Highly recommend using backer rod/backing material for all joints. Not designed for continuous submersion or use below the waterline. Store unused product in dry location at or below 70F 21C. Not for use with nail holes or butt joints. For questions, please call our Help Line at 1-800-347-4583 or visit us at Titebond .