[Simple as Can Be]Using this solder kit is a cinch. Just heat the wire connectors and shrink tubing with a hot air
and amateurs alike can do it in a snap.
[Color Coded]Never reach for the wrong piece again. The color coding system categorizes each piece by length and diameter, making your job that much easier.
[Designed for Durability]The high quality polymer shrinks quickly, provides insulation and is 100% waterproof. Each piece will outlast repeated wear and tear without slipping or tearing.
[ Possibilities] kit is great for a wide of electrical repairs. It's a must for data line protection, automotive, marine and outdoor applications.
HOW TO USE:
Select the proper size connector for the wires, stripped wires.
Insert the stripped wires into the connector.
Apply heat evenly to the connector from the 2 ends first until tubing shrinks and the adhesive flows, then continuously apply heat evenly until solder sleeve melt and seal.
Note:
For best , use a hot air and rotate the connector to evenly apply heat.
raise the temperature from low to high gradually when you use the hot air to heat the .
DO NOT set the high temperature at the beginning, or the surface of connector will be over-heated, which will lead to the tube melt while the solder ring still not melt.
Keep the hot air at the proper distance. 't too .
Shrinkage 2:1
Minimum shrink temperature: 80C
Minimum temperature for solder to melt: 138C
Operating temperature :-55 - 125
Waterproof Class: IP 67
Material:Metal + plastic
Colour:Red, blue, white, yellow
Package Contents:
150 * waterproof shrink-wrap ring terminals (50 x red shrink connector AWG: 22-18, 50 x blue shrink connector AWG: 16-14, 40 x white shrink connector AWG: 26-24, 10x yellow shrink connection AWG: 12-10)
1 *plastic box
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.
