Straight Pneumatic Push to Quick Connect Fittings,Bulkhead Union,10mm Tube OD X 10mm Tube OD

Product Features
Product Name : Push to Connect Fittings
Model :MPM-10
Color : Silver Tone,Black
Material : Plastic,Metal
Thread Size : M18*1mm
Tube Size (OD) : 10mm / 3/8"
Operating Pressure : 0-9MPa
Operating temperature：0 - 60 Degree Celsius
Dimension : 42mm x 21mm / 1.65-inch x 0.83-inch (L x W )
 
Package Content:
1 pcs x Push to Connect Fittings
 
Description:
1.The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely.
2.Push-to-connect tube connection on two end 
3.A good release cap can withstand greater and stronger pressure without tripping.
4.Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life.
5.Elliptical release ring help to connect tube easily by manual, no special tools required.
6.Outside (and Inside where applicable) hexagonal wrench tightening.
 
Mounted:
1.Cut the pipe flat, no slope
2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak.
3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected.
4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.