U.S. Solid 1/4" NPT Electric Pneumatic Solenoid Valve DC 12V 5 Way 2 Position Normally Closed

Pneumatic types of valves can be found in a wide range of industries. They are used in Pneumatic Artificial Muscles (PAM) for robotics and automation. Manufacturing companies that use conveyors belts uses pneumatic valves in their conveyor belt systems. Food and beverage manufacturers use them to make, dispense or preserve food and beverage products.
This is the U.S. Solid 1/4" NPT 5 way 2 Position Pneumatic Electric Solenoid Valve. Itis a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.
This valve is a 5/2 valve which means it has 5 ports; 2 exhaust ports through which air is regulated as it flows out, 2 power ports that power the system, 1 supply port for the inlet of air pressure, and 2 flow positions. This valve is made with an aluminum alloy and has an aperture of 1/4”.
U.S. Solid pneumatic valves offer reliability, low power consumption, and have a long life. They are have prewired connections that makes installation, maintenance, and control simple.
SPECIFICATION
U.S. Solid Model: USS- PSV00034
Valve Type: 2 Position 5 Way
Thread Type: NPT
Operation/ Property : Normally Closed
Material : Aluminum Alloy
Size : A=B=P 1/4" (outlet / inlet) R=S 1/8" (exhaust port)
Voltage : DC 12 V
Applicable Media : Filtered Air
Power Rating (W) : 4
Aperture (mm) : 16
Flow Value (Cv) : 0.89
Insulation & Protection : Class F; IP 65
Working Pressure : 0.15 ~ 0.8 Mpa
Max. Pressure Resistance : 1.2 Mpa
Direct Operated/ Pilot Operated : Pilot Operated
Operation Temperature : -5°C - 50°C
Voltage : ±10%