Tirechain Load Range E, Mud, And K02 P265/65R-18, 265/65-18 P 7Mm Square Boron Alloy Two Link Tire Chains,

7.0 mm Square Alloy cross chains allows for added traction and durability. Square link provides the traction of the v-bar without the added profile of a welded v. The square design wears more evenly, unlike the twisted link that wears only on its high points. For easier installation of Square Straight Link Chains see our Sno-Chain Ramps . Rubber or spring tensioners are recommended. IMPORTANT: Square link tire chains are more durable and provide increased traction compared to twisted link snow chains. Twisted Link Tire Chains wear the high point of the twist which is a small fraction of an inch. Straight link tire chains wear the entire length of the link which could be an inch or more. This distributes the stress and wear of the chain. For Traction, the square alloy tire chains uses square rod which almost equals the traction of a v bar for ice. Twisted link is round rod. For off road conditions, square also provides additional traction since the links not nestled within each other like the twisted link. This provides more profile on the face of the tire for more traction. Fits: 8.25-15TR 285/75R15 P275/70R16 255/85R16LT 245/70R19.5 P275/60R20 275/55R79 wo Link Truck Tire Chain. 2 link tire chains provides for a more consistent ride by having more chain on the face of the tire. Therefore, helping to reduce the bumpy ride from being on chain � off chain. Two Link is defined as having a cross chain every 2 side chain links. Normal Chains are 4 link spacing. 4 Link is defined as a cross chain every 4rth side chain link. 15/64 thick. Recommended for over the road, chain law, semi trucks. For plowing or extended use, the Heavy duty truck tire chains below are recommended when available in your size. For easier installation of twisted linkTruck Tire Chains see our Sno-Chain Ramps. Please note: Since these are two link, there no cams on the side chain since the cams are replaced with a cross chain. Optional rubber or spring tensioners are recommended.