Crown CDi2000 800w 70V Commercial Amplifier+(20) JBL Black 30w Ceiling Speakers

• (1) Crown CDi2000 2-Channel, 800w 2,4,8-ohm 70V/140V Commercial Power Amplifier Amp
• (10) Pairs of JBL CONTROL 16C/T-BK 6.5"" 30w 70v Commercial Ceiling Speakers 4 Restaurant/Bar

• Crown CDi2000 2-Channel, 800w 2,4,8-ohm 70V/140V Commercial Power Amplifier Amp 
• Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs.
• Switch-mode universal power supply.
• Intuitive front-panel LCD screen for quick, easy configuration.
• Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting.
• Up to 20 user defined DSP presets are available.

Specifications:

• Channels: 2
• Sensitivity (for full rated power at 8 ohms): 1.4V
• Rated Power Output (per channel @ 4 ohms): 800W Stereo
• Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted)
• THD: < 0.5%
• Damping Factor (20 Hz to 400 Hz): > 500
• Frequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB
• Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB
• Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced

Features:

• (2) JBL CONTROL 16C/T-BK 6.5"" 30 Watt 70v Commercial Ceiling Speakers For Restaurant/Bar in White
• Components:
  • 165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround
  • 19 mm (0.75 in) soft-dome liquid-cooled tweeter
• Blind-mount backcan for quick and easy install
• Dual conduit/cable clamps
• Combined 70V/100V and low impedance direct operation
  • 50 Watts at 8O nominal setting
  • 30W multi-tap at 70V/100V
• 62 Hz – 20 kHz bandwidth with wide 110° coverage
• High 91 dB sensitivity for high maximum SPL
• White (-BK)

Specifications:

• Frequency Range (-10 dB): 62 Hz – 20 kHz
• Power Capacity (at low-Z)
  • 100 Watts Continuous Program Power
  • 50 Watts Continuous Pink Noise
• Transformer Taps: 30 W, 15 W, 7.5 W @ 70V or 100V (plus 3.8 W @ 70V only)
• Frequency Response (±3 dB): 96 Hz – 15 kHz
• Nominal Sensitivity: 91 dB
• Nominal Coverage Angle: 110° conical coverage
• Directivity Factor (Q): 7.8
• Directivity Index (DI): 8.2 dB
• Rated Maximum SPL: 108 dB @ 1 m (3.3 ft) average, 116 dB peak
• Nominal Impedance: 8 ohms (in direct/bypass 8O setting)
• Crossover Network
  • 12 dB/oct (2nd order) low-pass to LF driver,
  • 12 dB/oct (2nd order) high-pass to HF driver
• LF Driver: 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil
• HF Driver: 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
• Input Connector: Removable locking 4-pin connector with screw-down terminals.
  Max wire size