Self-Reset Dog Agility Tire Jump with non-rust aluminum alloy frame

The best design of practicable dog agility tire jump on the market. It resets itself to its original position in an event that any half tires or both halves were hit open by a trial dog. This mechanism eliminates the reset on tire jumps and disturbance on the competition ground or trial field, as well as saves a whole lot of time during the busy trails and competitions. The tire jump is built with an Aluminum alloy frame with stainless steel hardware for both indoor and outdoor setups. The metal frame is foldable and can be assembled for easy transportation and storage. The two half tires can be set to 5 different heights from the inner edge of the tire circle to the ground, each with 4" incremental, from 4" to 24" height. The inner diameter is 24" which meets the standard of AKC tire jump equipment roles. The whole tire consists of two halves that are made of soft-shell PE foams covered with color coded nylon sleeves. The tire measured at 30" in diameter from its outer wall to wall and 24" as the inner diameter. The color code is yellow and blue at the moment. There are also two attractive sleeve covers that are removable and washable for the metal upright supports. Overall setup and takedown is easy. The whole tire jump is light for carry around and use. Stakes are provided for holding down the metal support base. The jump heights marked on the sides of the metal frame upright supports are 4" 8", 12", 16", 20", and 24". Users can set the tire at any height from the base all the way up to 24" easily The self-reset tire jump is packed in 2 separate boxes. Assembly is required before the initial use. The detailed assembling instruction will be attached to the shipping box upon arrival.