Speedway Motors Deluxe Front Disc Brake Conversion Kit Compatible with 1955-1957 and 1959-1964 Chevy Full Size Cars

Complete “at the wheels” bolt on disc brake conversion kit. Works with your original drum brake spindles and steering arms. Uses GM-spec rotors and disc brake calipers for easy service parts needs. 11-inch drilled and slotted rotors feature GM 5x4.75 bolt pattern with 7/16-20 studs. Will fit original 14-inch disc brake wheels, though 15-inch wheels recommended. A significant increase in braking performance for today’s roads. Kit adds a total track width increase of 1-3/4-inches (7/8-inch per side) Not for use with 2-inch drop spindles and not compatible with 1958 drum spindles. Increase Your Driving Safety with Bolt on Disc Brakes for Your Full Size Chevy Car We’ve heard the story a thousand times. You’d really like to drive your full size Chevy a bit more, but today’s distracted drivers and increased traffic on today’s roads just puts too much stress on you as a driver trying to get your Impala, Biscayne, or Bel-Air stopped safely when traffic hits the brakes in front of you. We get it. We’ve driven plenty of manual drum brake cars in our time and on a busy street or highway it is the definition of a white knuckle ride. But don’t hang up those car keys! Upgrading your old drum brakes to a more effective and safer front disc brake system is one of the best safety upgrades you can make to your ’55-’64 Chevy car. Everything You Need to Update Your Classic Chevy from Drum to Disc Brakes Our 11-inch single piston caliper disc brake conversion kit is a vast improvement for your ’55-’64 full size Chevy car. Using a unique caliper adapter bracket along with drilled and slotted GM 11-inch rotors and common ’78-’88 GM “Metric” brake calipers, this kit is 100 percent bolt on with zero modifications to your factory drum brake spindle. The drilled and slotted rotors provide improved heat dissipation and gas venting for a better pedal feel, and there’s no denying their great looks behind large window performance wheel packages too. Note that this kit does not mount to the 1958 model year spindle due to specific differences this one year spindle has. Additionally, this kit does not work with aftermarket 2-inch drop spindles. We do offer a ’55-’57 Chevy disc brake kit that is compatible with our 2-inch drop spindles for use with GM Metric calipers if you’re looking for that extra low ride height up front with a ’57 Chevy disc brake conversion. Our front disc brake conversion kit includes rotors, calipers, caliper brackets, bearings, seals, brake hoses, and all installation hardware. There is no need to cut/flare your existing brake lines or make any additional changes at the wheel other than using a 14-inch disc brake spec wheel or upgrading to a 15-inch or larger wheel for caliper clearance. Due to the brake rotors used in this kit track width is increased 7/8-inch per side (or 1-3/4-inch total). This is typically not a problem unless running wide aftermarket wheels that are already close to your fender edges. A Significant Braking Upgrade for The Money Our ’55-’64 full size Chevy front disc brake kit is easy on the wallet too! For not much more than the cost of a complete drum brake overhaul (new drums, shoes, hardware, wheel cylinders, bearings, seals, hoses, etc.) you can upgrade your Biscayne, Impala, Tri-Five, or other full size Chevy car to the power and safety of disc brakes. We can offer such a cost effective kit by utilizing proven components, such as ’69-’72 Chevy rotors and ’78-’88 GM Metric calipers as part of the kit. These items have been used on countless millions of Chevy cars and will get the job done without the need for custom “race car” bits like two-piece rotors and other special machined adapters/hardware. If you’re looking for something a little more basic, we do offer this same disc brake upgrade with plane face rotors, a perfect solution if you're running steel wheels