TRUE SHIELD Hydrophobic SealerFEATURES & BENEFITSEasily diluted with water for ready useProduces a hydrophobic treatment that inhibits water absorptionExcellent performance and stability at (5–20%) active ingredient levelsDeep penetration of absorbent surfaces due to small molecular structure provides added repellencyReduction in water absorption reduces spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substratePenetrating treatment will not change appearance of substrateSolvent-free and releases little Volatile Organic Compound(VOC) upon applicationCOMPOSITIONWater-dilutable silane/siloxane emulsionMilky white40% active ingredients as suppliedDESCRIPTIONTRUE SHIELD Hydrophobic Sealer is supplied as a 40% active silane/siloxane emulsion and should be diluted for use to between 5% and 20% depending on the application and substrate to be treated. As with other silane-based water repellents, upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the substrate. Treated substrates are hydrophobic and normally retain their original appearance. To insure desired performance and appearance, the product should be evaluated by applying to a small representative area in an inconspicuous location.HOW TO USE Dilution TRUE SHIELD Hydrophobic Sealer dilutes readily with water to make stable dilutions between 5% and 20% active ingredient levels. It is recommended to use demineralized or distilled water when formulating. When using tap water, dilution stability should be tested. Salts or minerals in the water can affect the stability of the emulsion. For best results, add the water portion to the emulsion rather than adding the emulsion to water. Mix Ratio is 9 parts water to 1 part emulsion
