2pc 2.5 Inch Wheel Adapters | 6X135 TO 8X170 | 6 LUG TO 8 LUG Hub Centric w/ Lip

Spacer Width: 64mm (2.5 Inch) each side Quantity: 2 Pieces Bolt Pattern: Convert Hub 6X5.5 (6X139.7) or 6X135 to fit Wheel 8X170Center Bore: 108mm to 125mmThread Pitch: 14X1.5 Spacer Type: Lug Centric / Conversion Adapter This spacer set includes open end lug nuts to secure the spacers onto your factory hubsInstallation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between.(VERY IMPORTANT!! ) Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failureTest fit the product before fully bolt down - Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max)Be sure to retorque the adapters after 20-25 miles of driving**The height of the base plate adapter is approx. 30mm & the height of the factory studs can not exceed 28mm to allow the top plate adapter to go on properly, Please be sure to check your vehicle prior to purchase