Auto Body Paintless Dent Repair Removal Tools Pops a Det Puller With Slide Hammer Bridge Puller Hot Melt Glue Gun

WHAT IS (PAINTLESS DENT REPAIR)?
Paintless Dent Removal () is the art of massaging metal back into its original form. It is the fastest, most efficient and cost effective method for removing dings, dents, creases, and hail damage. It's the "Green" alternative to traditional auto body repair.

WHY DO YOU NEED AN PAINTLESS DENT REMOVAL KIT?
*Saves money on costly dent repairs
*Removes dents without damage to the paint
*Enhances the look and increases the value of your vehicle
*Comes with professional-use components

HOW TO USE THE TOOLS TO REPAIR DENT IN CAR?
1.Clean the dent of auto body/car door with a clean wet cloth; 
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into 
the glue gun, connect the power source and preheat for 5 minutes; 
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. 
4. Pull the trigger and apply the drawing gasket with extruded glue; 
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres; 
6. Align the Slide Hammer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 
8. Clean the repaired place with a clean wet cloth. 
9. Dent Out is done and save huge cost to car repair shop
WHAT?S IN THE BOX?
1 x Tools Bag
1 x Line Board
1 x T-Bar Slide Hammer
1 X Dent Lifter
1 x Bridge Puller
1 x 20W Glue Gun
1 x Rubber Hammer
1 x Tap Down Kits
24 x Glue Pulling Tabs
10 x Mini Glue Sticks
1 x Plastic Bottle
1 x Small plastic shovel
1 x Cleaning Cloth
1 x Waterproof Bookmark Catalogue