HART 2-Piece 9-inch All Purpose Reciprocating Saw Blades

It's is a good stater blade. I had a couple of jobs set up to use and it held up for a couple of weeks using on a daily basis. After using for a little over a for a month it started to kick back pretty often. This will work for at-home use but not for a contractor that will use for a while.

I was a bit concerned about whether or not there is a universal fit or connection style for all reciprocating saws. But not to worry, these Hart 9 inch all purpose recip saw blades fit right in to my fairly expensive, battery powered brand name recip saw purchased from a local big box hardware store. All the blades used previously in this saw were 6 inch and too short to do a good job of cutting out, for example, interior walls that need to come down. I loaded one of these aggressive toothed blades in and headed outside to check out the performance. While I cannot vouch for its ability yet to cut through nails, this saw did a very nice job of cutting through two by four lumber and a few three and four inch branches that had fallen during the winter storms. I had no PVC to try it out on, but it held its own cutting up an old used tire we are converting to DIY edging. Just an FYI, because of the added length one might note an increase in the vibration radiating through the saw body while pushing hard into the subject wood, etc.