TRQ Front Rear Suspension Stabilizer Sway Bar End Link LH RH Set 4pc for Sonata PSA66855

I bought the Sonata Front & Rear Sway Bar Link 4 piece set and glad I did. Here are some important notes. The rear ones can be installed while on car ramps. However, to install them you need a 6mm hex key for the control arm portion as well as a 11/16 open wrench to hold the upper and lower portion to be able to torque them up. The front sway bar links did not move, so I didn't need to use an additional wrench. The OEM rear used a 19mm nut, the 1AAuto also used a 19mm nut. The OEM fronts used a 19mm nut, the 1AAuto part used a 18mm nut. The difference in the suspension noise was immediately felt and worth the time laying under the car today in Michigan. Initially I was going to skip the rears, but glad I bought the complete kit. Frankly I have learned that sway bar links are good for about 60K miles and thus the reason for replacing them. Also, note there are NO zerk fittings which many don't have except for Moog. However, for $54.95 and free shipping, I can afford another complete set in 60K miles should it be needed. This is my third purchase from 1AAuto and find the parts and videos worth while and informative. Now, I have ordered the belt tensioner and hope to see a video on the Sonata. Happy Holidays everyone!