Saving customers' money and providing good products continue to be 's mission.\n\nWe all know that light strips can make our house beautiful, and using the LED light connectors will make the installation of light strips much easier! RGB LED strip light connectors are made of PBT material, which is heat and burn resistant. The working temperature of the solderless adapter is 0~40℃, the storage temperature is -20~60℃, and there is no fire hazard. The non-waterproof LED tape light clip has a maximum wattage of 72W and can be used with either low or high wattage light strips. The 4-pin LED light connector is better than the corner connector, the connection is natural and beautiful without wasting space. The clip-on connector measures 16 x 15 x 4 mm and can be used with any 4-pin 10mm wide SMD 5050 flexible light bar. The RGB light strip connectors are easy to use. You open the wire clip first, insert the 10mm LED light strip into the clip under the two contact pins, make sure the side of the strip is aligned with the + symbol, then close the wire clip. The TV backlight extension connectors will create a quick shunt, strong connection without the hassle of soldering. You can use gapless LED strip connectors to connect your LED lights to every corner of the room. Not only will the RGB strip connector not affect your normal life, but it can also add a touch of color to your life and work!\n\nWarm Tips:\n\n1. RGB LED strip connectors are Non-Waterproof. 2. MAKE sure you put the LED strip under the pins and not on top. 3 Be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
