Chevy GMC 1500 88-95 Single 3" Truck Exhaust Kits 1 Chamber muffler Slash Corner

This kit will upgrade your single exhaust system with a larger 3 inch tail pipe and a performance muffler for your 1988-1995 Chevrolet Silverado / GMC Sierra 1/2 ton applications. All Wheel Bases. 6 or 8 cyl.
This corner exit kit will come out under the passenger side of the rear bumper. *Corner exit kits sold without a tip will need a tip to allow the exit to come out past the outside perimeter of the vehicle*
3 3 inch saddle clamps and 4 insulated rubber hangers
This kit has the 3 inch O.D. tail pipe included
Higher flowing and longer lasting mandrel bend pipe is included.
The Slash Cut weld on tips are a chrome plated stainless steel 12" long and 3.5" round . They require a standard wire feed mig welder with regular mild steel wire. A special welder is not required.
The 1 Chamber muffler will give you an aggressive tone. It will give that deep throaty tone and mind blowing performance normally found in more expensive brand name mufflers. This is a great choice for the budget minded enthusiast that is looking for great sound and performance at a great price.
Please note: This system is designed to replace your factory OEM exhaust starting from the inlet of the muffler . If your exhaust has been replaced or modified previously fabrication to the existing exhaust on your truck may be necessary for the proper installation of our kit. Kits sold without a tip will require a tip for proper fitment to allow exit to extend to the outside of the vehicle.
Trucks with modified suspension or body lifts may also require fabrication of the exhaust or truck for the proper installation of our kit.
This kit is designed to fit All Wheel Bases. 6 or 8 cyl. GASOLINE ENGINES ONLY
*Product disclaimer: THIS IS NOT A COMPLETE "DO IT YOURSELF" kit. It is recommended that this kit be installed by a professional. Fabrication may be required. Any type of suspension or wheel/tire modifications may affect system clearances. We do NOT include any portion of the exhaust in front of the muffler. Additional parts or fabrication will likely be required.