Geekpure 10 Inch Whole House Replacement Water Filters Set with PP Sediment and Carbon Block -4.5"x 10"-5 Micron

Specification:

Maximum Pressure: 90 psi (6.2 bar) ,

Temperature:40-110°F/5-45°C ,

Shelf life: 5 Years.

Note:

1. Please lubricate the o-ring with silicon grease and use wrench provided to prevent leakage. you may search "whole house water filter " on YouTube, there is some installation video , it is very helpful if it is the first time to install it.

2. Protect filter housing from freezing.

3. This filter housing has a maximum operating pressure rating of 90 psi, if you suspect that your water pressure will at any time exceed 80 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 60 psi or less.

4. The rubber o-ring provides the water tight seal between the cap and the sump. it is important that the o-ring be properly SEATED IN THE GROOVE of a water leak could occur.

More valuable information:

1. What is dimension of the filter ?

ANSWER: It is standard sized 4.5" OD x 10" height filters .

2. What is the function?

ANSWER:

PP spun filter, Remove sand, dirt, sediment. life time:6-12 months.

Carbon block filter, Remove chlorine, taste & odors, very fine particulates. life time:6-12 months.

3.If not Geekpure, the filters is available to other brands housings?

ANSWER:Please don't worry. it compatible to most 10 inch standard sized whole house water filter housing .

4. What is in the box?

ANSWER: 2 x PP sediment filters and 2 x Carbon Block filters .

PS.The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality.