Cross Bar for Audi A4 Allroad 2015-2023 Top Roof Rack Luggage Carrier Black 2x

Fits nicely and looks good. No issue with any of the parts. Solid construction. Perts are packaged well and the 4 large support clamps are already assembled. You do not need to take them apart and reassemble them as shown in the directions. Directions are just pictures so you need to go through them carefully to understand them. I used some light spray lube to get the rubber parts to go on more easily. The 4 long assembly screws are 5mm hex. The wrench provided is basic so a long 5mm hex tool or a 5mm bit for a power screwdriver is very time-saving. There is no recommended torque setting for the screws so I did it my feel and experience. Keep the provided wrench in the car so you can retighten if ever required or adjust the spacing. placed the rear bar in the same location for the factory cross bars, which you can locate by round indents on the inside of the existing roof rails. I placed the front bar behind the existing rail support snd not in the factory location because I did not want to block ant sunroof light. The integrated lock on each support means they are safer from theft.