Note
1. Pressing down and holding on the vacuum cover is very important, it will affect whether the vacuum can be good, and there will be sparks on both sides of the heating wire. When you start the machine,please be sure to press the vacuum cover tightly.
2. Do not confuse the time setting of the seal and vacuum. If the sealing time set too long, and there will be sparks on both sides of the heating wire.
3. There is no vacuum oil inside,please buy it on yourself
4. You might receive the machine with the oil leaking. Please don't worry,that is vacuum pump oil,and it would not affect the machine's functions. The parcel is inverted during transit to cause this problem.
Specifications
Noise:<80 dB
Rate of exhausting:5.5L/s
Model:DZ-320
Seal bar length:10.2in(260mm)
Current:5A
Power supply:110V/60HZ
Motor Power:800W
Shell material:Stainless steel
Workroom size:340*330*70mm
Type:Vacuum packing machine
Guarantee:2 years
Packing speed:1~4pcs/min
Workroom lowest absolute pressure:<=1KPa
Suction Speed:2 CFM
Max. sealing size:320mm*10mm
Inlet air bore:0.2
Application
This machine is applicable for vacuum packing of food,grain,fruit,pickle,preserved fruit,ehemical medicine,medicinal materials,electronic elements,precise instrument,rare metal,erc. In the form ofliquid,solid,powder or paste by using plastic film or plastic aluminum foil film.It can prevent the packed products from oxidating,mildewing,worm-eating,rotting or damping,and prolong the shelf period.It especially applies to industries as tea,food,medicine,shop and research institute,etc.and has features as beautiful outline,compact structure,high efficiency and simple operation, etc.
Steps:
1.Set the vacuuming time, first set for 30 seconds, according to the specific vacuum effect to set.
2.Set the sealing time, first set for 2 seconds, if it is a thick vacuum bag, increase the sealing time.
3.Set the cooling time, first set for 2 seconds.
4.Close the vacuum cover, press the vacuum cover manually, then press the start button, after the vacuum table is running to release the hand.
5.When the vacuum table is attained to the green area (0.06-0.08Mpa), it means that the vacuum has been completed.
