Hero image 0 of Kojem Front Strut Shock Absorbing Tower Covers W/ Mag Ride Compatible with Chevrolet Corvette C8 2020-2022, 0 of 9

Visit the Kojem Store

Kojem Front Strut Shock Absorbing Tower Covers W/ Mag Ride Compatible with Chevrolet Corvette C8 2020-2022

(No ratings yet)

Key item features

Item specifics
- Condition: New
- Brand: Kojem
- Size:2.4(H)*8.26(W)*11(L)
- Manufacturer Part Number: LYAP-886-1
- Placement on Vehicle: Front
- Material：ABS plastic
Features
- Material:Excellent quality and durable ABS plastic material.
Fitment:
- 2022 Chevrolet Corvette Stingray Convertible 2-Door
- 2022 Chevrolet Corvette Stingray Coupe 2-Door
- 2021 Chevrolet Corvette Stingray Convertible 2-Door
- 2021 Chevrolet Corvette Stingray Coupe 2-Door
- 2020 Chevrolet Corvette Stingray Convertible 2-Door
- 2020 Chevrolet Corvette Stingray Coupe 2-Door
Function:
- Prevents the water from entering the strut towers,which may cause the top nut and bolt to rust.
- Installation - Easy installation can be completed in 30 minutes.
Pay attention:
- This product is only available for Corvette with magnetic drive at the shock tower strut. Please confirm the fitment in advance.
Package included:
- 2 front strut Tower covers.
Installation Steps
1.Use the Pry tool or your hand to pop off the side covers and the large center cover.Make them hold on and pull upward to remove them.
- NOTE:(When you replace the shock tower cover,please check whether there is water collect in strut mounts,if yes,use a hair dryer or cleaning cloths to soak up the water.)
2.Slide driver side under first:
- Pull the wire harness out of the way from the driver's side strut tower using a pry tool,make sure that the wire harness is behind the shock tower cover when install it.
- Remove the bolt from the side of the coolant reservoir with 10mm socket
- Take out strut tower cover and insert it into the tab between the strut tower and the reservoir.And tighten the bolt with 10mm socket.
3.Then install passenger side:
- Slide the passenger side strut cover into place by angling the cover towards the outer fender then rotating it into place.(Be careful not to bend or damage the hard line or coolant reservoir!)
- Used a zip-tie and funneled it through the screw hole on the cover and tied it along side a tube which was mounted on the car.(Ensure the zip tie is around the rubber isolator.)
4.Reinstall the center and side covers and the job is DONE.
WHY CHOOSE US?
- High Quality
- Water-Resistant
- Waterproof
About us：
- BRING A DIFFERENT DRIVING
- This brand originated from an engineer obsessed with machinery.
- Now, Kojem is equipped with top-of-line machinery and many experienced engineers. Under the belief of “Keep open-minded & judicious, exploring the motors”, we will help more car enthusiasts experience the joy and fulfillment of assembly with better products.

Specs

Manufacturer part number
LYAP-886-1
Vehicle model
LYAP-886-1
Vehicle year
2020
Vehicle make
Chevrolet
Vehicle fitment type
Specific
Brand
Kojem

Current price is $21.99

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Ships to

Arrives between May 29 - Jun 1

Sold and shipped by FAMETRADE

4.276872246696035 stars out of 5, based on 4540 seller reviews(4.3)

Report an issue with this seller

Free 30-day returns

About this item

Product details

The strut tower covers are compatible with Chevy C8 Corvette 2020 2021 2022.

This durable and sturdy product is made of black high quality ABS plastic.

Our front strut could prevent water and protect your car.

The installation is easily and can be completed in 30 minutes.

Includes a pair of front strut tower covers(left & right)

Item specifics
- Condition: New
- Brand: Kojem
- Size:2.4(H)*8.26(W)*11(L)
- Manufacturer Part Number: LYAP-886-1
- Placement on Vehicle: Front
- Material：ABS plastic
Features
- Material:Excellent quality and durable ABS plastic material.
Fitment:
- 2022 Chevrolet Corvette Stingray Convertible 2-Door
- 2022 Chevrolet Corvette Stingray Coupe 2-Door
- 2021 Chevrolet Corvette Stingray Convertible 2-Door
- 2021 Chevrolet Corvette Stingray Coupe 2-Door
- 2020 Chevrolet Corvette Stingray Convertible 2-Door
- 2020 Chevrolet Corvette Stingray Coupe 2-Door
Function:
- Prevents the water from entering the strut towers,which may cause the top nut and bolt to rust.
- Installation - Easy installation can be completed in 30 minutes.
Pay attention:
- This product is only available for Corvette with magnetic drive at the shock tower strut. Please confirm the fitment in advance.
Package included:
- 2 front strut Tower covers.
Installation Steps
1.Use the Pry tool or your hand to pop off the side covers and the large center cover.Make them hold on and pull upward to remove them.
- NOTE:(When you replace the shock tower cover,please check whether there is water collect in strut mounts,if yes,use a hair dryer or cleaning cloths to soak up the water.)
2.Slide driver side under first:
- Pull the wire harness out of the way from the driver's side strut tower using a pry tool,make sure that the wire harness is behind the shock tower cover when install it.
- Remove the bolt from the side of the coolant reservoir with 10mm socket
- Take out strut tower cover and insert it into the tab between the strut tower and the reservoir.And tighten the bolt with 10mm socket.
3.Then install passenger side:
- Slide the passenger side strut cover into place by angling the cover towards the outer fender then rotating it into place.(Be careful not to bend or damage the hard line or coolant reservoir!)
- Used a zip-tie and funneled it through the screw hole on the cover and tied it along side a tube which was mounted on the car.(Ensure the zip tie is around the rubber isolator.)
4.Reinstall the center and side covers and the job is DONE.
WHY CHOOSE US?
- High Quality
- Water-Resistant
- Waterproof
About us：
- BRING A DIFFERENT DRIVING
- This brand originated from an engineer obsessed with machinery.
- Now, Kojem is equipped with top-of-line machinery and many experienced engineers. Under the belief of “Keep open-minded & judicious, exploring the motors”, we will help more car enthusiasts experience the joy and fulfillment of assembly with better products.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Manufacturer part number

LYAP-886-1

Vehicle model

LYAP-886-1

Vehicle year

2020

Vehicle make

Chevrolet

Warranty

Warranty information

The Email Address for Sales Service: ken@ecotricusa.com

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.