4 Sides H4 9003 High&Low Beam For Toyota vanza 2007-2015 2016 2017 2018 2019 2020 LED Headlight Bulbs 2pcs

Note:

1. Our LED bulbs only replace halogen or led bulbs.Can not replace the HID bulbs. Please double check before order. If you are unsure the item fit or not, please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not, thank you.

2. Please note that some vehicles (such as the 2007+ Dodge, Chrysler, Jeep, GMC, BMW, Mercedes-Bens and more) maybe require a set of CANBUS adapters to be installed to avoid error message, turn signal hyper flash or fast blinking.This is NOT a problem of LED bulb and is NOT covered by warranty.To confirm if need a DECODER or not, just remove the original headlight bulb and check if the dashboard show BULB ERROR or not.This listing does not include bulb adapter.

////Specifications:

* Bulb Type: H4 9003
* Output Power : 110W/set,55W/Bulb
* Luminous Flux: 10000lm/ Bulb,20000LM/set
* Beam Type: High Beam/ Low Beam
* Light Source: 4-Sides COB Leds
* Material: Aviation Aluminum + ABS
* Color Temperature: 6000K White
* Working Voltage: 12V
* Number of Bulbs: 4
* Waterproof Rate: IP68
* Working Temperature: -40℃ - +80℃
* Beam Angle: 360 Degrees
* Lifespan: Over 50,000 hours
* Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator
* Fitment Type: Direct Replacement
* Placement on Vehicle: Front, Left, Right
* Fitment Style: Plug and Play

////Parcel Content:

- 2 * H4 9003 LED Headlight Bulbs

////Note:

1. Please check the size of your bulbs on your vehicle before purchasing.
2. Please make sure the headlight housing has enough space for installation before purchasing.
3. Professional installation is highly recommended. If you have any questions, please feel free to contact us.

Installation Caution:

1. As a safety measure, make sure the car has had time to cool down properly before beginning the installation process.
2. Park the vehicle or make sure it is running smoothly.
3. Make sure to turn off the ignition and remove the keys.
4. Take care to avoid burns, especially when turning vehicle lighting on or off.
5. Take care to avoid crushing or cutting the bulbs. Also be sure not to touch the bulbs with your fingers, as this will cause staining.
6. Completely examine the connection of the contact points, ports and cables, as poor connections can cause lighting problems.
7. Make sure the end of the bulb does not come into contact with the inner headlight shield when adjusting the bulb.