Battery Memory Saver, Car Battery Lighter Extension Cable Stable Current For Car Battery Replacement Maintenance

Battery Memory Saver, Car Battery Lighter Extension Cable Stable Current for Car Battery Replacement Maintenance
Specification:
Features: 1. It is great to have in car in case of emergencies. 2. Powered by any starter with a 12V outlet into an OBD II Memory Saver. 3. Preserves vehicle and electronic presets. 4. The reinforcing clamp, stable current, fixed sheath, insulation. 5. Easy to replace and install. 6. 8amp built into the memory saver, better on overload . 7. Interface connector between a 12V DC power source and vehicle's OBD II interface. 8. This device can work with any 12V DC power source, including starter, DC 12V -acid battery, or another car's DC 12V power outlet. 9. The device can also get the 12v power supply from lighter of another car.
Specifications: Condition: Color: As Pictures Shown Material: ABS Weight: 259 g / 9.1 ozapprox.
Warning: 1. When working with the vehicle's battery, all the battery manufacturer's and vehicle manufacturer's instructions, warnings and directives regarding battery disconnection, removal and replacement. 2. The vehicle's electrical system is receiving power from memory saver through the OBD connection. Therefore, the vehicle's battery connectors are electrically live and should be covered with an insulator to prevent the connectors from touching metal or each other and causing a short circuit. After each use, disconnect the memory saver and use a dry cloth to wipe all dirt or oil from the connectors and the cable. 3. During battery replacement, DO NOT turn on ignition the car, which its old battery is disconnected and new battery not yet finished replacement. As well, DO NOT turn the key on "ACC ON". If not, the of the memory saver probably burn out, due to high amp and overload. 4. Security attach the OBD II connector of memory saver into your car OBD II port to get a contact, if not, during battery replacement, the bad contact between the OBD II connector and your car, may cause missing power supply on your car ECU Electronic Control Unit, or called auto computer.
Troubleshooting: The 12V DC plug of memory saver should be correctly connected 12V power source, if not, the red led light on the plug will not light up, that means no power from the power source or with incorrect polarity connection. If the power source from another car, then check whether the car's Lighter on condition or not. If the power source from a starter, then verify if the cause is from the contact. If the power source is from an alternative 12V -acid battery, then check whether the polarity correct or not.

Package List: 1 x Lighter- Auto Starter Power Converter 1 x Lighter -Clip Power Converter