QSP-2875-95 Self-Priming Centrifugal Pump

AMT QSP-2875-95 3" Cast Iron Self-Priming Centrifugal Pump, Maximum Flow 275 GPM, Maximum Working Pressure 125 PSI, Buna Mechanical Seal, Shaft Seal in Stainless Steel. AMT Self-Priming Cast Iron Centrifugal Pump are designed for a broad range of high capacity applications, including dewatering, liquid transfer, circulation, drainage and irrigation. Dual volute design reduces radial load on motor. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping connections. All models are fitted with self-cleaning, semi-open stainless steel impeller, which can handle 3/8" diameter semi-solids. Built-in check valves for fast priming are standard on all units. Fill and drain plugs for easy installation and servicing. Cast Iron Construction with Stainless Steel Impeller; Buna-N Mechanical Seal and O-ring; Optional Viton Mechanical Seal and Flapper Valve Available; Optional Silicon Carbide Seal Available; 3" NPT Suction and Discharge Ports Stainless Steel Sleeve; Dual Volute Design Reduces Radial Load on Motor; Fill and Drain Plug for Easy Servicing; Maximum Working Pressure 125 PSI; Maximum Temperature 180 F; Maximum Flow 375 GPM; Maximum Head 110 Ft.; Self-cleaning, Semi-open Impeller; Pump Features 5 HP TEFC (Totally Enclosed, Fan Cooled), 3 Phase, 208-230/460 VAC/60 Hz, 14/7 Full Load Amps, 184JM Frame Motor; Optional Mounting Base Available on All Above Models; NOTE: Dimensions are in inches and have a tolerance of +/- 1/4". NOTE: Electric supply for ALL motors must be within +/-10% of nameplate voltage rating (e.g. 230V +/-10%= 207 to 253).