Honeywell NK300S 1/2" Boiler Feed Combination With Pressure Reducing Valve

Honeywell NK300S 1/2" Boiler Feed Combination With Pressure Reducing Valve Serves as a boiler fill valve used in closed loop heating systems. Comes with 1/2" NPT male threaded and sweat tailpieces Specifications: Model: NK300S BOILER FEED COMBINATION Model Numbers: NK300S-100 (includes sweat and threaded connections) Medium: Water Regulator Mechanism: Fiber-reinforced EPDM diaphragm Filter Mechanism: Stainless steel fine filter mesh Inlet Pressure (Maximum): 150 psi (10.3 bar) Inlet Pressure (Min): 30 psi (2.0 bar) Outlet Pressure Range: 10 psi - 58 psi (0.7 bar - 4.0bar) Outlet Pressure: Factory set at 15 psi (1 bar) Pressure setting tolerance: ± 4 psi. Differential: 14.5 psi minimum (inlet to outlet) Fluid Temperature (Maximum): 180 Degrees F (82 Degrees C) according ASSE 1081 Ambient Temperature Range: 33 Degrees F to 140 Degrees F (1 Degrees C to 60 Degrees C). Pressure Gauge: 0-60 psi @ max temp 140 Degrees F (60 Degrees C) Connection size: 1/2" NPT or sweat Connection size discharge: 1/4" NPT Connection size test ports: 1/4" NPT Installation position: horizontal pipework with discharge connection directed downwards Max. flow rate: 16 gpm (60 l/min @ 22 psi (1.5 bar) Approvals: ASSE 1081 Listed The NK300S is a (re)filling combination valve that contains an integrated pressure reducing valve, strainer, double check backflow preventer with air vent (to protect potable water supply against back flow of heating water into supply pipe), two shut-off ball valves, pressure gauge, and conveniently located test ports for easy inspections and check out. Product Features: NK300S-100 contains: Pressure reducing valve (PRV) Strainer Double check valves Backflow preventer Air vent Shut off valves Test ports ASSE 1081 approved Sweat & threaded connections Stainless steel fine filter mesh 30 – 150 psi inlet pressure 10 – 58 psi outlet pressure (Factory set at 15 psi) Dezincification resistant brass housing