Phyun Car Glass Scrach Remover Polishing Felt Pad Cloth w/ 100g Cerium Oxide Powder US

Specification:
Brand new
Color: as shown in picture
Cerium oxide powder capacity: 100 g
Felt polishing wheel diameter: approx. 25mm
Felt polishing wheel pad diameter: approx. 76 mm
Felt polishing wheel pad plate diameter: approx. 80 mm
Drill adapter diameter: approx. 8 mm
Pad Max RPM: 12000

Feature:
Cerium Oxide is the best polishing powder to glass scrach because the chemical and physical reaction.
It can save you great money to change a new glass.
Easy to use, just mix powder with water and apply to the glass surface with the polishing felt.
Can be used on windows, mirrors, tabletops, windshields, glass tables, shower screens, windscreens, fish tanks, car headlights etc.

Suggested Instructions for Use of Cerium Oxide:
(1) Supplies needed:
1. Cerium oxide
2. Water (some recommend distilled water)
3. Polishing wheel
4. Electric drill
5. Small plastic tubs (Pint or quart size)
6. Spray bottle

(2) Direction:
1. Clean the area you're going to work on thoroughly. Be sure there is no dirt or grime on the glass, as this may result in additional scratches once you start buffing.
2. Have two small plastic tubs ready; quart or pint sized containers work well. Fill one halfway with water.
3. Place your polishing wheel into the water; let it become thoroughly damp, but not dripping wet.
4. Put some of Cerium Oxide into the empty tub, and add enough water to create a slurry (a thin, paste-like mixture).
5. Attach the dampened polishing wheel to your electric drill and dip it into the slurry.
6. Place the polishing wheel on your work area, use small size felt wheel if scrach is near corner of windows ; keep the wheel moving in an up and down and circular motion. Be sure that the slurry does not dry up, as this could cause your glass to overheat and crack. If your slurry is becoming dry, you can spritz it with a spray bottle full of water.

Package included:
1 x Cerium Oxide powder
1 x 25mm felt polishing wheel
1 x polishing wheel pad plate
1 x M10 To 8 mm drill adapter
5 x 75mm diameter wool polishing pad
1 x polishing cloth (random color)

Note:
It is for light hair line scratches, surface marks, water stains only.
Working with Cerium Oxide can be messy. When buffing, there will be splatter. You may want to have to have supplies available to cover any area you don't want to have to clean later.
Please allow 1-3mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.