TECHTONGDA Pneumatic Hinge Boring Insertion Machine 110V Woodworking Hinge Drilling Machine 35mm x 50mm Drill

✔Description:
This machine is mainly used for drilling processing of cabinets, wardrobes, door processing and manufacturing, and can adjust the drilling position vertically and horizontally, which is convenient and fast, and the switch control is accurate and in place.
This single head woodworking hinge drilling machine features elegant appearance, humanized design, simple and convenient operation, flexible, stable and reliable drilling operation, high efficiency.
The machine has no tool calibration device, which can ensure the need of drilling depth. Three holes in the vertical position can be processed at one time, including one big hole for hinge head hole and two for assembly screw hole. Suitable for drilling various profiles.
NOTE：Confirm drill hole size before purchase.


✔Parameters: Voltage：110V Power：1500W Punching Depth：0-50mm Speed：2880r/min Drill：φ35mm*1,φ3mm*2 Combined Drill Model：48-6 Scale：39.4″(100cm) Air Pressure：0.6-0.8MPA Net Weight：140.8LBS（64kg） Gross Weight：233.2LBS（106kg） Package Size：31.89″*28.54″*65.75″(81*72.5*167cm)


✔Advantage:
1.Thickened and enlarged table, easy to use, ensure success rate.
2.High quality combination drill, drill bit can be changed at any time.
3.Air spring rubber compression device to easily secure the board.
4.The scale control is accurate to reduce the error rate.
5.Adjust the position of the positioning baffle at will according to the scale as needed.
6.Button operation, simple and convenient, with emergency stop switch, more safe.
7.Flat locked cabinet door for easy opening and closing. It is convenient to view the line conditions. And the internal space is large, allowing for the placement of parts, tools, etc.
8.Foot switch control machine operation, high sensitivity, stable and durable, anti-skid wear, free hands.
9.The punching depth is adjustable, and the total stroke is 2.7″(7cm) adjustable.


✔Precautions For Use：
1.Before operation, check whether the power cable is properly connected, whether the protective device and the pressing device are complete, and whether the components are normal.
2.The operating position should be bright and without shadow.
3.The drill should be centered, balanced and sharp.
4.This machine is mainly used for wood punching processing (thin aluminum can also be), and the selection of materials can not have nails, screws and other tools damaged or blunt foreign bodies.
5.Hands should not touch the rotating parts of the machine tool during operation, and the wood chips should not be removed during operation. The power supply must be cut off before adjusting or removing the wood chips, and can only be carried out after the machine tool stops working.
6.Stop the machine immediately if anything abnormal is found.


✔Item included：027278
TECHTONGDA Pneumatic Hinge Boring Insertion Machine 110V Woodworking Hinge Drilling Machine 35mm x 50mm Drill