Heating Flexique Glue: Microwave InstructionsUsing a microwave-safe container, such as the one in which the product arrives, heat desired amount for up to 15 seconds and stir. Repeat until it becomes completely liquid. Do not overheat. Boiling may cause it to overflow. Temperature will reach approximately 140 degrees F 60 degrees C. TIP: place the container on a clean dry surface when heating, so that any accidental overflows can be reused. Once dried, place overflowed product back in the container and reheat with the rest of the Glue. Note: Heating instructions above based on a 950-watt microwave. Adjust your heating times if your microwaves wattage differs. If you mix smaller quantities youll want to start with lower heating times to avoid overflowing. Using Flexique Glue to bond Flexique to itself:Apply sparingly with a brush to the surface of each piece being glued, and press together until cooled. Smaller/thinner pieces should hold together after 30 seconds. Larger/thicker pieces may take longer. Reheat Glue if it begins to cool off and get clumpy. If the mixture becomes too thick with repeated reheating, add a few drops of water, then heat and mix. Repeat until desired thickness is achieved. Using Flexique Glue to bond Flexique to fondant: If you are applying Flexique decorations to fondant, first spray the fondant with an edible lacquer spray and let it dry. This seals the moisture in the fondant. You can then apply the Flexique Glue to both the Flexique decorations and the fondant. Note: Flexique decorations should cure at least one day prior to attaching them to fondant with the Glue.Using Flexique Glue to stiffen Flexique: Heat Flexique and Flexique Glue to liquid form and mix 1 part Glue to 3 parts Flexique. Brush on, pour, or spread in the same manner as untreated Flexique. Flexique Glue can be stored on the shelf. No refrigeration is necessary.
