Duet3D PanelDue LCD Controller Module - v3.0

Key Features:

• A separate controller PCB that is not integrated into the LCD PCB
• Supports a separate LCD of 4.3", 5" or 7" sizes.
• 4-wire cable to connect the PanelDue to your controller board for the serial and power connections.
• A SSD1963 LCD panel (not included) is required in one of 3 screen sizes/resolutions: 4.3″ (480×272), 5″ and 7″ (800×480 pixels)

PanelDue Controller is a separate controller PCB that is not integrated into the LCD PCB. It supports a separate LCD of 4.3", 5" or 7" sizes. A PanelDue can display 7 tool/bed/chamber heaters in total on 5" and 7" screens, and 5 heaters on 4.3" screens. Connections to the external SD card socket that is included on most compatible displays is available via a 10-way ribbon cable connector on version 2.0 PanelDue boards.

Item Specifics
Connectivity: 4-wire cable for the serial and power connections is also supplied (1m long)
Voltage: 5V power from host 3D printer controller or 2-wire async serial interface with 3.3V signal level (5V tolerant input).
Compatible screens: TFT displays using a SSD1963 controller, Resistive touch panel using a XPT2046 or compatible chip, have a 2×20 2.54mm pitch connector.