(2 pack) BONA

I am the hall manager for Fort Bragg Lions and our hall has a very well seasoned redwood floor that I am responsible for maintaining. I use the Bona cleaner after each rental and the polish every few months. The important thing about using this product is the floor must be very clean before applying the polish. I use the micro fiber mop with one head to clean and a separate head to apply the polish. The polish is a great product but it can become cloudy or streaky if you are not careful to apply it with a clean mop head to a clean surface.

Before you decide to not try this product because of the negative reviews here, you need to try it yourself. Too often people are using completely incompatible cleaners and polishes with their hardwood floors. Blame your lack of knowledge, not the product! It is your responsibility to know what you are walking on and if your floor is in any way waxed, oiled, etc. then this is NOT what you want to use! Think water and oil. This is meant for water based finishes. Also be wary if you are using this on a floor that you did not originally purchase or install. I believe this is where a lot of problems occur. Sometimes previous owners/tenants use something like Pledge or Murphy's oil soap and that's where your problems begin. These will put an oily layer over your nice finish, not always noticeable at first and if you were to apply this Bona polish over it then it will definitely appear as a cloudy buildup. Your best bet is to thoroughly clean and maybe use a light abrasive/stripper to clean any gunk off the finish before any polish application. And still, try a small test area first before doing the whole floor. So long as you're using the polish as intended, this is one of the best ways to go about refreshing and concealing minor surface scratches in a urethane floor without needing to do a full sand and recoat. It won't make your floors perfect like the day they were installed