GSM 900MHz Mobile Cell Phone Signal Booster Amplifier Repeater Antenna Home LED

1. High gain, easy installation and operation.
   
   
   
   

   
   
   
   
   

2. Full-duplex, Dual-port design.
   
   
   
   

   
   
   
   
   

3. Use ALC technology, adjust extent automatically.
   
   
   
   

   
   
   
   
   

4. LED Light Working & Signal Condition Indicators.
   
   
   
   

   
   
   
   
   

5. Big linear power, control intermodulation & scatteration stably.
   
   
   
   

   
   
   
   
   

6. Dependability stand by GB6993-86 standard.
   
   
   
   

   
   
   
   
   

7. Compatibility of electromagnetism according with ETS300 609-4.
   
   
   
   

   
   
   
   
   

8. CE and RoHs Approved.
   
   
   
   

   
   
   
   
   

😛 Specification:

Frequency range : 890MHz--915MHz(Up link) ; 935MHz--960MHz(Down link)

Power: -70 ~-40 dBm/ FA (1.23MHz)

Gain : (Up link) 50/55/60/65Db/±10DB (Down link) 55/60/65/70Db±10DB

Signal coverage : Up to cover for 150 square meters use

Impedance : 50Ω

Seclusion : >65dB

Power supply : 110V

Output Voltage: 5V

Compact design: Indoor use

Signal Repeater Size: 140*100*20mm/5.51*3.94*0.79"

😛 Installation Approaches:

1. Fix up outdoor antenna reception on housetop and point to signal tower.

2. Connect outdoor antenna to "BTS" port in repeater machine through cable.

3. Connect indoor antenna(s) to "MOBILE" port in repeater machine through cable also.

4. Plug power adaptor into AC power socket and finish installation.

😛 Installation note:

1. please make sure distance above 10M between indoor and outdoor antenna, it’s better divides one from another by a wall.

2. Please try to choose a good signal place to set up outdoor antenna.

3. Please sure that there are good signal 4-5 bars on your outdoor, or it will not work on your room.

😛 Installation Steps

1.Install Outdoor Yagi Antenna

Select an appropriate location with strong and stable signal for outdoor antenna. When installing, the outdoor antenna should be horizontal while the small vertical bar vertical to the ground.

2.Install the repeater and connect the feeder
Connect the outdoor feeder with interface OUTDOOR(BTS) in repeater.

3.Install Ceiling Antenna
Select a room where the signal needs to be enhanced. Install the Ceiling Antenna in a high place (higher than two meters) and towards the ground.

4.The miniature repeater is made in aluminum which could help reduce the attenuation in signal transmission and radiation.

5.The area of signal amplification is about 100-150 square meters. There is no need to worry missing phone calls or network off-line.

😛 Package:

1 x Mobile Signal Repeater

1 x Indoor antenna