3 Phase 220V Three-in-one Plastic Granule Dehumidifier Dryer Auto-Replenishment 25Kg
Key item features
- Working Principle: Air is blown into the heating tubes within the drying cylinder via a fan. The temperature controller regulates the air supply temperature, creating a uniform airflow within the drying cylinder to achieve the drying effect.
- The insulated drying hopper adopts a bottom-blowing air duct design, paired with a cyclone exhaust device to prevent heat loss and improve drying efficiency.
- It is matched with a closed-loop feeding system, which prevents the dried material from re-absorbing moisture due to contact with external air.
- All contact components and raw materials of this machine are made of stainless steel, preventing contamination of the raw materials.
- The machine delivers uniform hot air distribution for high drying efficiency. Its proportional-integral temperature controller maintains temperature within ±3℃ tolerance.
- This machine dries raw materials dampened during packaging and transportation while removing surface moisture. It is suitable for PP, PE, ABS, PVC and other raw materials.
Specs
- Coverage area0 sq ft
- BrandMaisutseb
- Dimensions28.70 x 41.70 x 79.90 Inches
- Rec. useResidential
- Weight497.14 lb
- Has nrtl listing certificationN
- Free shipping
Free 30-day returns
How do you want your item?
About this item
Product details
Introduction:
The three-in-one dehumidifying, drying, and feeding system comprises a honeycomb dehumidifier, an insulated drying barrel, and a material suction unit. All equipment is mounted on a mobile stand, integrating dehumidification, drying, and feeding functions. It is suitable for various plastic raw materials, especially highly hygroscopic engineering plastics such as PA, PC, LCP, PET, and PBT. Under ideal conditions, it can achieve a dew point of -40℃.
Product Parameters
Voltage: AC220V
Phase Number: 3
Hopper Capacity: 55LBS (25KG)
Dehumidification Air Volume: 30m3/Hr
Drying:
Heating Power: 3KW
Fan Power: 0.75KW
Regeneration:
Heating Power: 3KW
Fan Power: 0.4KW
Feeding Fan Power: 1.1KW
Suction Machine Piping (Standard Configuration): 1.5" (38.1mm)
Vacuum Hopper: 2Gal (7.5L)
Photosensor Hopper: 2Gal (7.5L)
Bucket Material: Stainless Steel
Net Weight / Gross Weight: 497.1lbs(225.5kg) / 637.1lbs(289.0kg)
Precautions
1. The installation site of the machine should take into account the situation of other equipment and material stacking, and it is recommended to leave appropriate space around it.
2. The machine's working environment requires a clean and tidy room. When drying raw materials that may generate toxic gases, reserve space for installing an exhaust system.
3. Please note: Due to the high power consumption of this product, a power plug is not included. We recommend that the buyer consult a professional electrician for the installation of a suitable circuit breaker.
Operating Instructions
1. Please ensure all installation and adjustments are complete.
2. Turn on the power supply inside the control box and activate the power switch on the dehumidifier panel.
3. Refer to the on-screen operation flow to configure settings.
4. After completing the following steps, press the start button to initiate automatic operation.
5. For initial use or after prolonged shutdown, perform internal circulation dehumidification first to ensure drying quality.
6. To stop operation during this period, press the stop button to initiate a cooling shutdown.
7. If an abnormality occurs during operation, an alarm will sound and a warning light will illuminate. (However, the alarm will not clear after shutdown; personnel must turn off the power and perform thorough troubleshooting.)
8. The timer switch setting can be used for pre-startup.
9. The control box contains a honeycomb wheel speed control (do not adjust arbitrarily).
10. Please ensure personnel safety during troubleshooting.
11. Disconnect the dehumidifier's main power supply.
12. Exercise caution around high-temperature pipes to prevent burns.
Note: The dehumidifier undergoes a cooling-down process before shutdown, resulting in a perceived delay in stopping.
Item Included (029162)
3-in-1 Plastic Granule Dehumidifier Dryer *1
Suction Tube *1
Suction Gun *1
Hopper Gasket *1
- Working Principle: Air is blown into the heating tubes within the drying cylinder via a fan. The temperature controller regulates the air supply temperature, creating a uniform airflow within the drying cylinder to achieve the drying effect.
- The insulated drying hopper adopts a bottom-blowing air duct design, paired with a cyclone exhaust device to prevent heat loss and improve drying efficiency.
- It is matched with a closed-loop feeding system, which prevents the dried material from re-absorbing moisture due to contact with external air.
- All contact components and raw materials of this machine are made of stainless steel, preventing contamination of the raw materials.
- The machine delivers uniform hot air distribution for high drying efficiency. Its proportional-integral temperature controller maintains temperature within ±3℃ tolerance.
- This machine dries raw materials dampened during packaging and transportation while removing surface moisture. It is suitable for PP, PE, ABS, PVC and other raw materials.
Specifications
Coverage area
Brand
Dimensions
Rec. use
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
