Harbweb HDPE Patio Dining Chairs Set of 2, All-Weather Armchair, Brown

I ordered this Harbweb HDPE Outdoor Chair from Walmart for two reasons 1) I really enjoy a HDPE Adirondack chair and matching HDPE table on my patio over the last few months. 2) It will also match the color of a HDPE bench I recently ordered from Walmart. HDPE is a great material for an outdoor chair compared to metal or wood. It is very hard but smooth. It won't rust, rot nor splinter. It has high-stress cracking resistance. In central Florida where I live, this chair will be weatherproof from sun (UV resistant), rain, humidity and salt air. It's also low maintenance. Basic soap and water will keep it looking clean. No need for sealing nor painting. It's waterproof and repels chair-eating insects! It should have minimal fading, swelling nor warping due to its high durability. The instructions are illustrated. There was a mistake in the illustration of Step 1 that ended up forcing me to disassemble the chair. I included an attached photo of the correct illustration. It was not an easy assembly. Hex-head bolts, nuts and screws are used to assemble the chair. A hex Allen wrench and a 10mm open-end wrench are included. I used my own 10mm socket instead of the open-end wrench. The nuts are impossible to finger tighten. Note: Do not completely tighten any bolts, screws or nuts until the last step (Step 6) is completed, otherwise, the arm rests and back support will not align. Also, I found that most of the factory-installed Phillips screws that hold the seat and back were not tightened completely. The chair is comfortable for me to sit in because I'm now used to sitting on a HDPE Adirondack chair and bench for some time now. The surfaces of all the parts are very smooth, with no sharp edges anywhere. This is a well-designed, high-quality, non-biodegradable chair. I expect it to last many years. I highly recommend this Harbweb HDPE Outdoor Chair.

This chair was ordered specifically for my elderly mother, who often complains about chairs being either too high or too low and the hardness or softness being uncomfortable. I remembered she had a chair similar to this one in the past, which was an outdoor model, so I assembled it. The assembly process was swift and hassle-free. The chair's sturdy construction is noteworthy. Additionally, I've added a pillow for extra cushioning, which seems to be working well. My mother is delighted with the chair's height, finding it suitable, and she can now stand up without struggling. Her previous chair was too low, causing her discomfort whenever she tried to get up. This chair seems to be a perfect fit for her.