30T Gantry Frame Type Hydraulic Press Brake Bender Bending Machine Single Column 220V 3PH
Key item features
- The high-quality motor provides precise energy matching, perfectly cooperates with the hydraulic pump to achieve high-precision control, effectively improves the pressure and speed stability and has high reliability, long service life and good environmental adaptability.
- The hydraulic oil for the hydraulic system is stably stored in the oil tank, and the oil tank has a large capacity of 8L, ensuring the hydraulic system has the sufficient oil to circulate. The oil tank can also assist in heat dissipation to keep the oil at the appropriate working temperature.
- The manual direction valve is simple in structure, high anti-interference capacity and low in fault rate. It can flexibly adapt to special working conditions and can stably work in the severe environments at high temperature, dust, vibration, etc.
- The die assembly adopts the modular design, quickly adapting to different workpieces to be processed. The die assembly has high structural strength, long service life and a good forming effect. It is also compatible with multiple working procedures.
- The control switch adopts the flip cover structural design, effectively enhancing the operation safety and reducing the possibility of accidental operation. The flip cover shell is resistant to dust, water and dirt and well adapts to different workshop environments.
Specs
- BrandLGXEnzhuo
- ColorBlue
- Has nrtl listing certificationN
- Free shipping
Free 30-day returns
How do you want your item?
About this item
Product details
Introduction:
The industrial electric gantry frame type hydraulic press brake is a heavy press working facility integrating the hydraulic transmission technology and the gantry frame structure. It is mainly used for the press work such as disassembly and assembly, forming, straightening, stretching and sheet metal forming, and has the advantages of high tonnage output, precision control, multiple functions, energy saving, high efficiency and safety protection. By means of the high adaptability and reliability, the hydraulic press brake can be widely used in the industries of automobile manufacturing, household appliances, metal processing, machinery manufacturing, etc.
Attention:
There is no plug on the power cord. Please let a professional electrician conduct wiring operation. Ensure the power supply meets the electric requirements of the machine and is reliably grounded.
Regularly check and replace the state of hydraulic oil to ensure normal operation of the machine.
Do not touch the running parts during operation. Do not put the hands into the machine. Do not allow people or objects to be located next to the running parts of the machine.
Do not start the machine when the molds are not fixed or not aligned.
Place the workpiece in the center to avoid eccentric loading.
Do not exceed the rated load capacity and nominal pressure during operation.
Wear protective devices such as anti-smashing shoes, protective gloves and goggles.
Operation Method:
Check whether all parts and systems are intact, and ensure the hydraulic system, electrical system and die assembly can work normally.
Connect the machine to the 220V 3-phase power supply with reliable grounding.
Press the start button, run without load for a few minutes, and observe the working states of the pressure gauge and hydraulic power unit.
Place the workpiece on the workbench and fix it tightly.
Start the machine and process the workpiece normally.
After completing the operation, turn off the machine and clean the machine thoroughly.
Note:
Before using, please ensure the rotating direction of oil pump is consistent with the label mark. NOTE: REVERSE ROTATION IS FORBIDDEN.
Fill 32# or 46# hydraulic oil into the pump.
Oil measure is up to the stipulations.
When changing the oil, make sure the oil is clean (The replacement period is 6 months.)
The working temperature is 10-50˚C.
Before starting the pump, please put the directional valve handle to the center position.
During usage, if it is found that the temperature is too high, the machine should stop till it is cool.
The machine is adjusted to the proper pressure before leaving the factory, if you want to change it, be sure not to exceed its capacity.
It is forbidden to press with no load, and when the piston rod is on the up dead position.
Parameter:
Model: HPB-30
Capacity: 300KN
Voltage: 220V 60HZ 3-Phase
Motor Power: 3KW
Pump: 2.5ML/R
Pressure: 25MPA
Tank: 8L
Travel: 250MM(9.8IN)
Machine Size: 95*35*150CM(37.4*13.8*59 Inches)
Net Weight: 318KG(701LBS)
Items Included: 057215-EnzS
30 Ton Hydraulic Press Brake Bender Bending 220V 3-Phase Single Pole
- The high-quality motor provides precise energy matching, perfectly cooperates with the hydraulic pump to achieve high-precision control, effectively improves the pressure and speed stability and has high reliability, long service life and good environmental adaptability.
- The hydraulic oil for the hydraulic system is stably stored in the oil tank, and the oil tank has a large capacity of 8L, ensuring the hydraulic system has the sufficient oil to circulate. The oil tank can also assist in heat dissipation to keep the oil at the appropriate working temperature.
- The manual direction valve is simple in structure, high anti-interference capacity and low in fault rate. It can flexibly adapt to special working conditions and can stably work in the severe environments at high temperature, dust, vibration, etc.
- The die assembly adopts the modular design, quickly adapting to different workpieces to be processed. The die assembly has high structural strength, long service life and a good forming effect. It is also compatible with multiple working procedures.
- The control switch adopts the flip cover structural design, effectively enhancing the operation safety and reducing the possibility of accidental operation. The flip cover shell is resistant to dust, water and dirt and well adapts to different workshop environments.
Specifications
Brand
Color
Has nrtl listing certification
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
